Cluster swap Polo V (6R) MFA to MFA+ immo help

[benji58]

Hi all,



I need your help !


I am doing a swap. MFA Johnson Control (polo V 2012) cluster to MFA+ VDO continental cluster (Amarok 2014)


But I've problem, immobilizer is different if insert immo from original cluster to amarok, the car not start...


Immobilizer from MFA Johnson Control is Micronas and MFA+ VDO Amarok is NEC
Have you a solution for transform micronas immo to NEC? (suppose micronas =immo 4 and NEC =immo 5)


Immobilizer original polo
https://mega.nz/#!fxYTnLiI!iR0q5Eyv-KkEC14w2o3m1ydnutiysw8yoTYH2zjr-Aw


Immobilizer Amarok
https://mega.nz/#!3h4F3aIZ!x_YNM3D9_4PCq8wIbjFyTvZGmmmA2u6waG0apjX 5jWk




Thank you in advance


benji58

[H2Deetoo]

Your links are corrupt :(

[benji58]

Sorry, the correct link :

Immobilizer original polo :
https://mega.nz/#!fxYTnLiI!iR0q5Eyv-KkEC14w2o3m1ydnutiysw8yoTYH2zjr-Aw

Immobilizer Amarok
https://mega.nz/#!3h4F3aIZ!x_YNM3D9_4PCq8wIbjFyTvZGmmmA2u6waG0apjX 5jWk


I use Smok soft for extract this security block

[H2Deetoo]

Your Amarok immo is corrupt, but you don't need it anyway.
Attached is your Polo immo converted to NEC.

I hope it will work straight away. There was 1 memberr which couldn't reuse the orig transponders so he had to learn new ones. No big issue.
But last time I did JC->NEC it worked right away.


Rgs H2Deetoo

[1 6 D]

H2Deetoo when switching from Micronas to NEC it can be done without changing immo transponder?

[H2Deetoo]

>when switching from Micronas to NEC it can be done without changing immo transponder?

Simply said no, you must learn new transponders.

However, if you have the knowledge, it seems you can calculate the correct CS bytes to get just 1 transponder to work in NEC.
But because most people need 2 transponders it is not really useful.

[benji58]

Thanks a lot H2Deetoo !

I try this week

what software do you use to convert the data ?
By PM, if you do not want here

[H2Deetoo]

I write my own tools