I need immo off for toyota aygo

[chafik4051]

hi
i need immo off toyota aygo
thanks

[rob h]

not possible.

[chafik4051]

not possible.
NOT POSSIBLE VIRGIN?

[rob h]

no need to make these virgin,
just turn ignition on with master key, bridge obd pin 13 with 4.
leave this 35 min, then synch is complete.

[chafik4051]

thank you for info

[klaudio]

no need to make these virgin,
just turn ignition on with master key, bridge obd pin 13 with 4.
leave this 35 min, then synch is complete.

Are you saying that any master key will get programmed if you bridge for 35 min? Since you said there is no need for virgin file.

[kiszka]

..........

[ZAHEER]

what is the actual problem ?
why you want to immo off the reason ?
these aygo and c1 are common problem with immoboliser

[schouten1977]

look at 2 immo wires what go from immo box to ecu one under the hood get broken i hat it once after the change clutch to much stress on cables

[rob h]

a immobox, with a learned master key,
it will match any new or used ecu in 35min.

Are you saying that any master key will get programmed if you bridge for 35 min? Since you said there is no need for virgin file.

[klaudio]

a immobox, with a learned master key,
it will match any new or used ecu in 35min.


Key learned, you didn't specify that. That's what I thought. :peaceful:

[ZAHEER]

the best way is make the immo virgin and reprogram the original transponder which came with the car OR program a new ID70 transponder and then follow the procedure as all our mats said in previous posts 35 min. and you are done, if you dont have any wiring issue

[esse]

Hi,
You can also take a used key
read with zedbull the key and insert data in immo box directly and paired it with the ecu