PDA

View Full Version : mazda 5 sid 807evo dpf off



kospoz
5th February, 2018, 09:25 PM
Hi finally i have read this ecu sid807 evo with ktag original but with 178 protocol not with 511.This is my first contact with this type of ecu can someone remove dpf from this file?
dpfremover can not do this file
Car is mazda 5 2011 model 1.6tdci Y6 engine

Thanks

kospoz
6th February, 2018, 10:22 AM
Nobody did this ecu before?

voltechcar
6th February, 2018, 12:39 PM
I have good solution...

kospoz
6th February, 2018, 02:25 PM
swiftec can do this file?

maajkii
6th February, 2018, 02:26 PM
can do, but cut little bit too much dtcs

mb7361
6th February, 2018, 02:31 PM
hi try this pass pm

voltechcar
6th February, 2018, 10:42 PM
swiftec have bad solution, the same in sid208 in psa......

kospoz
12th February, 2018, 04:43 PM
hi try this pass pm
File is good working 100%

mb7361
12th February, 2018, 07:07 PM
.........................