digimaster82
5th February, 2018, 10:24 PM
!!!PROBLEM SOLVED!!!!
I spent alot of time on this crappy car now...
Trouble is airbag, abs and dtc light is on and car does not start when air mass sensor is connected.
I tryed bmw scanner, autocom and x431 to read the car but only thing i can read is ecu and there is one fault code on can signal missing to cluster. I tryed another cluster. i disconnected abs, srs, light module... one by one to see if i can read when one of them is disconnected.
What i can understand there is 2 can lines? one for ecu and one for the rest of the car.
I DONT HAVE 20PIN in engine bay just the 16pin obd2 in car.
PLS im realy stuck here....
Car is 320 gasoline manual and year 2001.
I spent alot of time on this crappy car now...
Trouble is airbag, abs and dtc light is on and car does not start when air mass sensor is connected.
I tryed bmw scanner, autocom and x431 to read the car but only thing i can read is ecu and there is one fault code on can signal missing to cluster. I tryed another cluster. i disconnected abs, srs, light module... one by one to see if i can read when one of them is disconnected.
What i can understand there is 2 can lines? one for ecu and one for the rest of the car.
I DONT HAVE 20PIN in engine bay just the 16pin obd2 in car.
PLS im realy stuck here....
Car is 320 gasoline manual and year 2001.