View Full Version : Ducato edc16c39 FAP problem. Need help.
morgano
5th February, 2018, 10:32 PM
Hello.
Have a problem with a Ducato van, tried many options to remove fap but none seems to work 100%
Van comes back after some days with fap light on on cluster, and ash counter keeps increasing. Reseting ash level solves problem untill next week and van comes again "asking for a fap change".
Attached original and swiftec file.
Can anyone make good working file please.
thanks
Ignasvw
5th February, 2018, 10:46 PM
This solution is completle wrong. Swiftec also says that you need to remove sensors
morgano
5th February, 2018, 10:58 PM
Yes, i know it is wrong. Ash counter keeps increasing. But i don't have good manual solution in my base, that is why i ask for help ;)
Regards,
voltechcar
5th February, 2018, 11:09 PM
what dtc you have?
morgano
5th February, 2018, 11:20 PM
No dtcs, just fap light on dash.
maajkii
5th February, 2018, 11:25 PM
soot still growing..
i post solution for you tomorrow bro.
have a good night now!
voltechcar
5th February, 2018, 11:48 PM
try my solution
morgano
12th March, 2018, 10:53 PM
@voltechcar
Thanks mate, van is gone and not came back, so complete success.
Thanks once more ;)
voltechcar
13th March, 2018, 12:22 AM
:party ::party :
morgano
17th April, 2018, 10:04 AM
Van owner called again, :( voltechcar file lasted more than all previous tries, but again fap light on and limp mode.
Not yet arrived and not diag data yet, i assume soot still growing but slower with this last file.
More news to come when van arrive (again) :(
johak
17th April, 2018, 10:52 AM
one more solution
AVDigitale
17th April, 2018, 06:14 PM
try and this and report pass in PM!
reset dpf soot and calculate chks before write
voltechcar
17th April, 2018, 09:12 PM
use diagnostic tester and check differential pressure sensor on my file
morgano
18th April, 2018, 08:25 AM
use diagnostic tester and check differential pressure sensor on my file
As soon as van arrives diagnose seesion will be first move ;)
To the others, thank you guys. This van revealed as a nightmare, even it was presumably easy thing from the begining.
voltechcar
18th April, 2018, 10:51 PM
my solution v2, disconnect all sensor from dpf, 2 temp sensor you have from dpf and 3 turbo temperature and of course differential pressure sensor. Write and report
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.