PDA

View Full Version : MPPS V18 V MPPS V21 Clone



kennyash1
6th February, 2018, 09:59 AM
I see most sellers sell both v21 and v18 but only on v18 software. Which clone is better ? and pros and cons and dodgy cars not to use on? thanks

sdtsedat
6th February, 2018, 10:13 AM
Don't use clone, i have buyyed mpps v21 with interface "eu quality" and read 3 cars, interface Hardware broken, no usb, no driver. Buy geniune device. I hope you don't have this situation when flashing ecu..

Inquizit0r
6th February, 2018, 10:17 AM
Clone v21 is good. BUT. You must rework it before use.

teerak2uk
6th February, 2018, 03:15 PM
Clone v21 is good. BUT. You must rework it before use.A few flashes and still dead

Sent from my SM-G935F using Tapatalk

Tezotto
7th February, 2018, 11:23 AM
Clone v21 is good. BUT. You must rework it before use.

What would that rework look like?

electrohicham
8th February, 2018, 09:55 PM
is eu mpps v21 software working ok ? can use with v18 hardware ?

Inquizit0r
9th February, 2018, 09:18 AM
I change K-line chip and add some capacitors.

Tezotto
9th February, 2018, 11:46 AM
I change K-line chip and add some capacitors.

Would you help me out of this?
I bought a clone and I would like to rework it.

Inquizit0r
9th February, 2018, 12:07 PM
Take a photo of your PCB.

blackcorri
9th February, 2018, 12:14 PM
what exactly do you have to revise there?

Tezotto
9th February, 2018, 12:46 PM
[QUOTE = Inquizit0r; 3211289] Pegue uma foto do seu PCB. [/ QUOTE]


I'm waiting for his arrival as soon as I get the photo.


Thank you for now.

Tezotto
12th April, 2018, 08:49 PM
Just arrived, follow the image ...

520900

Tezotto
16th April, 2018, 03:33 PM
Take a photo of your PCB.

From the photo you can tell me if my mpps need rework?

Meck
16th April, 2018, 04:59 PM
before 2 days i recive form ebay v21 i read just 3 time and is lock no usb nothing is dead i write to the seller he say why you not use v21 to v18 firmare but he give me cd with v21 software and i lose 90 dollars but one positive is i get the tricore cable i need to connect ecu on table with dijag

PaoloDigital
19th April, 2018, 11:31 AM
Hello friend , I

PaoloDigital
6th January, 2019, 02:24 PM
Not , not work ,