PDA

View Full Version : DCM 3.5 problem



Ignasvw
7th February, 2018, 10:29 AM
Hello, yesterday i managed to kill dcm 3.5 via obd. genuine cmd failed... CMD did vread, i writed file with dpf off mod, and after that no connection with ecu. Cmd says " no data from ecu. Kess says " cant identify chasis " or smth.. I tried to write ori (vread) file Usprog, but no luck. THen i readed ecu. I saw that cmd missed all MAPs zone. Now i have galleto, i can read write with jtag. Ori vread file is 3.072Mb size, galleto read 3.073Mb. I can write cmd readed file with galleto, because i get error. I tried a lot of solutions, but none of them cant bring my ecu back to life. I attach ori cmd read, then usprog read after cmd crashed, and then file that i readed with galleto. Maybe someone had this issue in past. Or someone have ori file readed with jtag pinout.

AVDigitale
7th February, 2018, 10:35 AM
Cmd and some others tool do this problem,galletto in jtag mode is the best for this type of ecu

Sent from my SM-N910P using Tapatalk

DR Race
7th February, 2018, 10:42 AM
I have done with kess dcm3.5 only OBD, and till now no Problem , i mean Ford delphi dcm 3.5 , normal file from kess has 3.5 mb , if it help I can send you ori file one read with kess , and I think I have mpps also, 140 and 163 hp , if you need I will post file !

Trimis de pe al meu SM-G930F folosind Tapatalk

Inquizit0r
7th February, 2018, 10:43 AM
KESS has no problem with Read/Write DCM3.5 Ford via OBD. Even on 12.3-12.5V.

DR Race
7th February, 2018, 10:46 AM
KESS has no problem with Read/Write DCM3.5 Ford via OBD. Even on 12.3-12.5V.Yes I do Ford dcm 3.5 always with kess, no problem till now ! Always 12,5 -13V !

Trimis de pe al meu SM-G930F folosind Tapatalk

johak
7th February, 2018, 10:57 AM
the problem is probably the wrong checksum
if you want to try this with galleto

Ignasvw
7th February, 2018, 10:58 AM
guys, thanks for reply, but i know that almost all chinese can do it without problem. But its genuine cmd, i didnt expected that it will destroy that file. I better need bdm read of this ecu

DR Race
7th February, 2018, 12:44 PM
Somtimes shit happend , i hope you can bring ecu back to life, recovery from CMD ??? You have to report this to cmd , they can help you , call support cmd!

Trimis de pe al meu SM-G930F folosind Tapatalk

morgano
7th February, 2018, 12:47 PM
guys, thanks for reply, but i know that almost all chinese can do it without problem. But its genuine cmd, i didnt expected that it will destroy that file. I better need bdm read of this ecu

Try flashing this one with galletto ;)

Regards

Ignasvw
7th February, 2018, 01:04 PM
Write as full or only micro?

Ignasvw
7th February, 2018, 01:08 PM
Try flashing this one with galletto ;)

Regards
Already tried this solution

Ignasvw
7th February, 2018, 01:09 PM
the problem is probably the wrong checksum
if you want to try this with galleto
i tried this solution too.... lol

morgano
7th February, 2018, 01:22 PM
Was worth trying lol ;)

Ignasvw
7th February, 2018, 01:26 PM
i tried maybe 10 solutions... lol

sdtsedat
7th February, 2018, 01:46 PM
Is problem solved? Maybe try with Abrites to flash ori?

Ignasvw
7th February, 2018, 01:47 PM
i cant flash via obd, because ecu is DEAD .. :(

sdtsedat
7th February, 2018, 01:52 PM
Can you connect bench to ecu with Jtag? Try with K-Tag and see if you have ecu data..
Strange situation friend and hope it comes good!

Let me know if we can help you.

Regards from Belgium,

sdtsedat
7th February, 2018, 01:56 PM
Try this mate with Fgtech and do ecu data,
If gives error, put screenshot

505163

SpecZ
7th February, 2018, 02:40 PM
What did cmd support tell you?

BTW never had issues with this ecu using CMD and i do them a lot!

Ignasvw
7th February, 2018, 02:52 PM
Main problem, that cmd did Virtual read, when im sure it can do simple read out. Now im trying with galleto jtag to wirte other car file. One strange thing that when i put other car file i can see hw and sw . And with all files that i tried, i never saw hw and id,. I hope now it will work...

Ignasvw
7th February, 2018, 04:46 PM
Maybe someone can post any file readed from this ford via kess? Now i can read this, i think i almost bring back ecu to life

Inquizit0r
8th February, 2018, 02:13 PM
Here is KESS readed DCM3.5 Ford.

voltechcar
8th February, 2018, 02:27 PM
I need info about sw & hw than I download in database Alientech file for you ecu

Ignasvw
8th February, 2018, 04:48 PM
8455la022220617
28278455
97ri-010012
AG91-12A650-AHG
sw: ag91-14c204-lg

voltechcar
8th February, 2018, 04:55 PM
This is Mondeo 2.0 tdci 115ps?

voltechcar
8th February, 2018, 05:16 PM
pass pm, but they have only Kess read. If you have k-tag upload screen od id than I write to support

DR Race
8th February, 2018, 07:50 PM
Did you solve this problem , I can post for you kess ori obd read but I have only 140 hp and 163 hp here , if it help I will post , just say!

Trimis de pe al meu SM-G930F folosind Tapatalk

DR Race
1st April, 2018, 09:43 AM
Hi guys , I have yesterday on work Opel insignia 2.0 cdti 160 hp edc17 cp19 , read with CMD original, tuned file stage 1 , whrite with CMD, at 100% whrite failed, car won't start, send right away report to cmd support, support told me whrite ecu with ori file back , I did and all was ok , stupid CMD don't recognize that this ecu has active tuning protection , cmd support told me that Opel update after 2016 has a new full rsa encryption, and till now CMD didn't manage to solve that , but they didn't inform CMD user about this, support told me to flash in boot mode , CMD support =shitty, 1170 euro subscriptions for nothing, I have done job with ktag and , posted my cmd for sale !

Trimis de pe al meu SM-G930F folosind Tapatalk

sdtsedat
1st April, 2018, 01:34 PM
Hi guys , I have yesterday on work Opel insignia 2.0 cdti 160 hp edc17 cp19 , read with CMD original, tuned file stage 1 , whrite with CMD, at 100% whrite failed, car won't start, send right away report to cmd support, support told me whrite ecu with ori file back , I did and all was ok , stupid CMD don't recognize that this ecu has active tuning protection , cmd support told me that Opel update after 2016 has a new full rsa encryption, and till now CMD didn't manage to solve that , but they didn't inform CMD user about this, support told me to flash in boot mode , CMD support =shitty, 1170 euro subscriptions for nothing, I have done job with ktag and , posted my cmd for sale !

Trimis de pe al meu SM-G930F folosind TapatalkI sent you on pb

Verstuurd vanaf mijn SM-G955F met Tapatalk

wawan640
26th December, 2018, 10:45 AM
I also need the original firmware of Delphi dcm 3.5 on ktag. Hello have the same problem can help me there?