PDA

View Full Version : Golf V 1.4 engine BCA year 2005 checksum needed



Jashmine1983
7th February, 2018, 01:46 PM
Hi to all!
Please help with checksum on the file attache.
Is from an golf V, engine 1.4 petrol, engine BCA, year 2005, ECU Bosch ME7.5.10, 5612, 036906032AG, 0261208589.
Thanks!

I've writted this file with tl866 on this ECU but I can't connect on bench to this ECU. Tried with KESS, galetto, VCDS and autocom. None of this tools connected to it on bench. I've used the pinout from photo. This ECU must be connected to car to be prognosticated?

505158

sdtsedat
7th February, 2018, 01:47 PM
How did you read it? Obd or bootmode? Can you write ori file back again? Car starts?

Jashmine1983
7th February, 2018, 01:56 PM
Car does not start....
I did not readed....the person who tried to read it used mpps by OBD but when he tried to write he got error and the car did not start.
Now I'm trying to revive the ECU. I've attached the file from him, read with mpps by OBD. I do not have another file. I've compared with another file from this forum and didn't see any differences.
When I connect the ECU on the power source with the connection showed in the picture the power source shows only 0,01 A.

sdtsedat
7th February, 2018, 01:59 PM
If you don't have any difference in hex/dec value, try to write the file again and see if car starts. I check later if i have original file, but you can also use file from this forum.
Succes!

Jashmine1983
7th February, 2018, 02:02 PM
I've writted the file but on bech I can't connect. I'll try on car.....this ECU can't be read/ diag on Bench? Only in boot mode?

sdtsedat
7th February, 2018, 02:10 PM
I do this ecu always with boodmode, it is riskly to do over obd. Same by MED9.1 ecu. Wich tool did you have?

Jashmine1983
7th February, 2018, 02:11 PM
I have KESS, galetto and TL866 programmer for 29F800BB.
I've tried to connect in BOOTMODE...but did not succeeded.
I've write 29f800 with tl 866.

sdtsedat
7th February, 2018, 02:19 PM
Let me know if it is working.

olds 454
8th February, 2018, 04:22 AM
Maybe you locked eprom with wrong file.

Jashmine1983
8th February, 2018, 05:25 AM
Itr is working....but still not understand why can't connect on bench

sdtsedat
8th February, 2018, 01:43 PM
How solve the problem? Flash file over obd?

TuningInside83
13th February, 2018, 10:54 PM
try this
pass pm

wowa557
14th October, 2022, 08:28 PM
I have the same problem with 036906032AM from Golf 5 and 036906032BE also Golf 5.
On bench no power 0,0V with other ME7.5.10 from Polo or golf 4 no problem connection on bech possible.
Why not with 036906032AM and .BE ? I have try 3 ecu's.

viktor0221
23rd November, 2023, 10:12 PM
I have the same problem with 036906032AM from Golf 5 and 036906032BE also Golf 5.
On bench no power 0,0V with other ME7.5.10 from Polo or golf 4 no problem connection on bech possible.
Why not with 036906032AM and .BE ? I have try 3 ecu's.

Have you ever solved it? Same ECU, same shit here. Pinout checked in Autodata, should be correct