PDA

View Full Version : CITROEN C3 1100 HFX ECU IAW48P2.72


nikostzimis
9th February, 2018, 12:05 PM
Hi DK!!
Can anyone give me pin code for this file ecu

Thanks
Nikos
505719
Vasily.U
9th February, 2018, 01:51 PM
Bad read 29f400, two times half a file. Don"t try write this file to ecu.
pin in pm
nikostzimis
9th February, 2018, 02:15 PM
If you have a good file with pin????because i have not fine VIRGIN file for this ecu. I have ecuvonix v4.5 and does not support it. ( file ecu is corrupt!!!)
and i will program bsi and key!!!
Thanks Brother for all !!!!
Regards
Nikos
Vasily.U
9th February, 2018, 02:54 PM
Try this file and check good contact on all pin 29f400 in your programmer
Shakeelbhugeloo
9th February, 2018, 05:06 PM
Bad read man original file not good
kiszka
9th February, 2018, 05:43 PM
...........
nikostzimis
9th February, 2018, 09:34 PM
Hi Vasily and Kiszka


The file is damaged before I read it.That virgin file is not good fan work did not stop!! I have not communication with ecu!! I am looking to find files correctly ECU and BSI,Then I can get code with I/O TERMINAL MULTI TOOL.
Thanks BR....
kiszka
9th February, 2018, 09:54 PM
...........
Vasily.U
9th February, 2018, 11:06 PM
I think it"s same soft
pin LUCB
kiszka
9th February, 2018, 11:27 PM
...........
Vasily.U
9th February, 2018, 11:34 PM
If in BSI pin 5TCN you can try this file
nikostzimis
10th February, 2018, 08:45 PM
I will try tomorrow.if start the car after i repair remote control with original vvdi key tool!
Thanks
Nikos


https://www.youtube.com/watch?v=OGrWra0ENDc
nikostzimis
11th February, 2018, 09:53 AM
This file works fine (post 11) programing bsi+ecu+chip key.
Thanks Vasily
Vasily.U
11th February, 2018, 10:06 AM
Remotes work?
nikostzimis
11th February, 2018, 10:55 AM
I don't try this today. we go to the house to relax !! I try tomorrow
Thanks Br...........
Nikos
Multipla
18th December, 2018, 02:27 AM
This file works fine (post 11) programing bsi+ecu+chip key.
Thanks Vasily
Can you have a file ori 95160 of BSI? tanks in advance.