PDA

View Full Version : hello help me 03G906018DH



0call12
10th February, 2018, 01:43 AM
search file audi a3 125kw 2006

03G906018DH r4 2.0l ppd1.2 no fat no egr can you help me?
thancks

mysterious
10th February, 2018, 08:28 AM
Read original file and post here

0call12
10th February, 2018, 07:42 PM
i have no file original but mod and non work perfectli sorry my english

voltechcar
10th February, 2018, 07:51 PM
018dh and what number sw?

0call12
10th February, 2018, 10:33 PM
my file is attcment i have read mpps 03g906018dh r4 2.0l ppd1.2 h22 0061

mysterious
11th February, 2018, 07:46 PM
In your file all DTC were delete, I did ori when delete Dpf and Egr, your flasher will calculate checksum ;)

0call12
11th February, 2018, 09:30 PM
Thanks but this file yuo have delete dpf and EGR? A can flash with mpps?

mysterious
11th February, 2018, 09:51 PM
Yes I deleted dpf and egr, you can flash file with your mpps.

0call12
12th February, 2018, 09:19 AM
I flash tour file and appare safe and no start

sdtsedat
12th February, 2018, 09:39 AM
Why you don't read the original file and flash another file?
You need now flash full bdm..

MPPS also no good tool, china clone broke after 5 - 10 writes..

voltechcar
12th February, 2018, 09:44 AM
this is ppd 1.2, write by obd the same flash and car must start

0call12
12th February, 2018, 10:25 AM
i have onli mpps

voltechcar
12th February, 2018, 10:29 AM
mpps programing this ecu to any problem

mysterious
12th February, 2018, 11:28 AM
Try write back your file on slow speed, and then report

0call12
12th February, 2018, 03:55 PM
I have flash with mpps and galletto not read and not write ECU

mysterious
12th February, 2018, 04:28 PM
One of chiptuning rules is if you don't know how repair it, don't' touch it.
Now you need read/write your ecu on the table with bdm method.
Tool than you need bdm100, KTag or V54 FGTech Galletto.

0call12
13th February, 2018, 07:14 AM
Not flash and not read ECU :2in1:

voltechcar
13th February, 2018, 10:28 AM
disconnect batery and try again. this is normal when to first progrming mpps ecu die. Try he beck on 100%

0call12
13th February, 2018, 12:32 PM
ok the disconnected for the whole night later I try again and update you

calibracbr
13th February, 2018, 01:13 PM
You have to try to write a few times untill you manage to write, because mpps like our coleg says, when write this ecu dies but if you try a few times it works.

0call12
13th February, 2018, 06:24 PM
no not work

sdtsedat
13th February, 2018, 08:04 PM
In this case you need flash FULL BDM to start the car.
Remember: MPPS china clone is the biggest shit that you can have, i read 1 edc17 car with uds (no one clone tool can read this by obd). Very well read ok! But after mod it car no start and no more communication with ecu and mpps hardware was die.

I flash full tricore with Ktag and all done.
I don't understand why people use allways mpps in this forum, for the same price you have kess/fgtech is much much better...

When you need full BDM, contact me

Regards,

0call12
14th February, 2018, 04:51 PM
Yes my mpps is finisced procedure check ok but turn off Key and turn in Key car in protection

voltechcar
14th February, 2018, 08:52 PM
what protection? this ecu not have protection. sdsedat edc17 have otp, first check sw than write flash....

0call12
14th February, 2018, 09:56 PM
ECU blokked diagnostic error p1570

dominik.m
14th February, 2018, 10:05 PM
Are You checking errors in immo?

dominik.m
14th February, 2018, 10:17 PM
This ECU have protection. ( ONLY AUDI!)
If not recognize the immo and there is no emulator , can not read or write by obd.

0call12
15th February, 2018, 03:29 PM
Hi have schematic for read bdm ?

dominik.m
15th February, 2018, 04:07 PM
Here........

0call12
18th February, 2018, 09:36 AM
ok i start car search ori 5wp45548ab audi a3 170cv ppd1.2

0call12
20th February, 2018, 11:18 AM
can nobody help me?

amtchip
30th May, 2018, 03:50 PM
Trouble with the same ecu