FGtech V54 0475 - ME17.5.20-24

[speedy100]

Hello,
FGtech V54 Euro 0475.
Need to R/W VW UP Bosch ME17.5.20 and ...24 ECUs
Does anyone have connection pinout please?

Thank You in advance for Your time!

Best Regards

[beltronics]

Here you go

506132

[speedy100]

Here you go
...


Thank You but this i have as it is in the manual but it is MED... and is totally different than ME...
Here are pics of the actual ECU from VW UP 1.0

506139 506140

Best Regards

[beltronics]

of that ecu I only have K-tag

[speedy100]

of that ecu I only have K-tag

Hello again,
Can You please post the K-tag pinout for this ECU?

Thank You and Best Regards

[maajkii]

Ktag only. I tryed with galletto but No sucess.


Wysłane z iPhone za pomocą Tapatalk

[diagprog]

Here connection boot for ME ECU Vag ME 17.5.20 - TC1767 ...

[speedy100]

Here connection boot for ME ECU Vag ME 17.5.20 - TC1767 ...

Thank You very much!
Is there a document for ME 17.5.24 also? Some VW UP come with these ECUs.
Also at the bottom of the pages has instructions to look at page 2 in case of error. What is this page please?

509520

I greatly appreciate Your help on this!
Best Regards

[beltronics]

Hello again,
Can You please post the K-tag pinout for this ECU?

Thank You and Best Regards
here you go

[trotyl]

IROM GPT so.....dont talk b..l sh... about MED. Benzine is benzine , diesel is diesel.
fgtech v54 you can forget. Here is in Trasdata, GPT so need minimum v 7.020. Thats it.
https://drive.google.com/open?id=1xussQWBx6AdjQDx52fdrQqL54j1rdCRg

[speedy100]

IROM GPT so.....dont talk b..l sh... about MED. Benzine is benzine , diesel is diesel.
fgtech v54 you can forget. Here is in Trasdata, GPT so need minimum v 7.020. Thats it.
https://drive.google.com/open?id=1xussQWBx6AdjQDx52fdrQqL54j1rdCRg

Thanks for Your input. Even though is not very clear what You mean about benzine and diesel...
I can confirm that FGtech can read and write ME17.5.20 in BOOT mode.
I am still waiting for pinout for ME17.5.24 as i do not know differences if any and do not want to make any damage...

Best Regards

[diagprog]

Thank You very much!
Is there a document for ME 17.5.24 also? Some VW UP come with these ECUs.
Also at the bottom of the pages has instructions to look at page 2 in case of error. What is this page please?

509520

I greatly appreciate Your help on this!
Best Regards

if you have fg installed you can find in pdf all pin out for boot mod in C:\ FGTech\DOCUMENTS\BOOT_MODE_TRICORE...
for ME 17.5.24 i don't now i never work with this kind of ecu's ,but here you find all pin out boot mod for fg in pdf.


https://mega.nz/#!69YwmJBB!Tfy0DPvb9nqqwfU-MPKH2AMZw9gkdbbMPtTsSJPYhNk

[trotyl]

Thanks for Your input. Even though is not very clear what You mean about benzine and diesel...
I can confirm that FGtech can read and write ME17.5.20 in BOOT mode.
I am still waiting for pinout for ME17.5.24 as i do not know differences if any and do not want to make any damage...

Best Regards

v54 will never possible.
Too old technology for working with modern systems. Security is not for wiruses, this is for us :) somebody spend much $$ for stop the people like you or me.
If you make 3 remaps in GPT cars, take 350eur per one. For 1000eur in aliexpress you are the king :D

[speedy100]

v54 will never possible.
Too old technology for working with modern systems. Security is not for wiruses, this is for us :) somebody spend much $$ for stop the people like you or me.
If you make 3 remaps in GPT cars, take 350eur per one. For 1000eur in aliexpress you are the king :D

Sorry but do not understand You... "...people like you and me..."
Do i look or sound Chinese???
Do we know each other???

[trotyl]

Why you need this pinout? You want a play with the data, change, clone copy, delete, doesnt matter. I thing factory doesnt like it. Better go buy ori brand new with warranty if your is defect. Also why remap, go buy new , faster model (VW UP :D) . This is the ideal way for factory. Yes or not?

[vinsk8]

i make a lot of these ecu, but I use Ktag, try these boot

[speedy100]

Why you need this pinout? You want a play with the data, change, clone copy, delete, doesnt matter. I thing factory doesnt like it. Better go buy ori brand new with warranty if your is defect. Also why remap, go buy new , faster model (VW UP :D) . This is the ideal way for factory. Yes or not?

Yes and i do have original tools, i always do. But can not afford to buy them double for spares... so i also have one of each clone :)
Most of the original tools when something goes wrong it takes long time to repair and can not be without them...