peugeot partner pin code

[ecu repair]

Hi mates,
Please i need your help to get the pin code out of bsi dump for 2001 peugeot partner.
Thanks in adnavce,
Best regards.

[momogsm]

hi
try.......UNXJ.................................... .

[ecu repair]

Thank you mate,i will try it and report.I do appreciate your support.Best regards.

[brend]

Pin Code - UNXJ

[ecu repair]

I am sorry the pin code did not work because somebody tried already to start this car so he maybe changed the bsi or the ecu....i have made vergin bsi and used a new transponder and programmed the key so it is okay but the car still does not start.I have a fualt code on ecu(pump module locked).The car is diesel 1.9 with lucas ecu.
Please does anybody have an idea how to solve this problem?
Thanks in advance.

[kiszka]

..........

[ecu repair]

mates is it possible to make immo off for this ecu?it has 25080

[brend]

mates is it possible to make immo off for this ecu?it has 25080

Put dump in here.

[ecu repair]

Here is the dump mate,thanks in advance.

[kiszka]

..........

[ecu repair]

thank you mate,then i will make the bsi vergin again and program it again with JXNU or maybe some can help with immo off.

[brend]

thank you mate,then i will make the bsi vergin again and program it again with JXNU or maybe some can help with immo off.

Put ecu dump .

[ecu repair]

I already post it....here is again

[ecu repair]

mate,i have made the bsi vergin again and programmed a new transponder with code JXNU but it did not start...I still have the ecu locked...the only way for me now to start this car is the immo off,can anybody help please?
Thanks in advance.

[kiszka]

..........

[ecu repair]

I have tried one more thing....i have made vergin ecu and i programed it again but the car still not starting....i can see through parameter measurment that the pump module is locked

[kiszka]

..........

[ecu repair]

a new transponder and the programming was successfull but i still have the diesel pump module is locked

[ecu repair]

ecu,bsi and the key are matched but when i go" into replacment parts" to match the pump module i get a message that it is impossible to match it because the ACC 12v is missming...i checked all fuses and they are okay even those under the main relays unit.