PDA

View Full Version : VW GOLF '' SAFE'' on dash



veej77
15th February, 2018, 10:17 AM
Hello folks,
I have a vw gof 2006 1,6l. I dont know the history of the car. It belongs to one of my friend which he had bought it from an auction. Problem with car is there is a SAFE sign o the dash all the time. Car can be started with the existing key etc no problem. Could some one please tell of a way to to get rid of the SAFE signe from the dash.
Appreciate your input
Regards

brend
15th February, 2018, 12:28 PM
First fault code in ecu,dash,immo????

veej77
15th February, 2018, 03:05 PM
Hi
Thank you for the reply. does not have any fault cods at all. Car starts and run absolutely perfect. someone must have done something in the past. But ive got no history of it any clue?
regards

dashtec
15th February, 2018, 05:47 PM
safe is normally to do with immo,

bersch8688
15th February, 2018, 08:24 PM
Sounds like you Have Golf 5 with Immo off ;-)

You can start the Car with Original Key and Dash show "Safe"

honingkoning
15th February, 2018, 10:12 PM
Sounds like you Have Golf 5 with Immo off ;-)

You can start the Car with Original Key and Dash show "Safe"

With safe and immo off tou should have error in dash (key not recognized).

Did tou check if leds removed from dash?

Wbr Adam.

maglaras
15th February, 2018, 10:59 PM
if you have carprog original you can fix it

brend
15th February, 2018, 11:40 PM
Hi
Thank you for the reply. does not have any fault cods at all. Car starts and run absolutely perfect. someone must have done something in the past. But ive got no history of it any clue?
regards

Maybe another ecu install in this car with immo off sulution.
Put ecu dump and we will see immo off or not.

veej77
16th February, 2018, 11:31 AM
Hi All,
Thank you all for the reply,
I checked everything. all the wiring etc intact etc..It has only one key though 2 keys been programmed. I believe it s the original key ive got.
Regards

kioji41
17th February, 2018, 06:45 AM
If dash is visteon this problem can be after mileage correction with some chinese tool because wrong checksum.
Do mileage correction with a good tool and you will solve the problem.

bersch8688
17th February, 2018, 12:17 PM
Digiprog can do this Job
"Visteon Repair"