2016 CIVIC DASH 93C86

[esx503]

Hello all and thank you before hand.

I have a 2016 Honda civic and i need help editing the miles. I'm having a hard time with my smelecom as it reads the dump but it doesn't read the miles or adjust the miles i get an error. I have attached the dump i wanna make sure I'm not the one doing something wrong and if you can please adjust it to 15k and some change. I used the directions on the pdf and im using smelecom to do the programming. thank you again

[Dr. Zoidberg]

Hello all and thank you before hand.

I have a 2016 Honda civic and i need help editing the miles. I'm having a hard time with my smelecom as it reads the dump but it doesn't read the miles or adjust the miles i get an error. I have attached the dump i wanna make sure I'm not the one doing something wrong and if you can please adjust it to 15k and some change. I used the directions on the pdf and im using smelecom to do the programming. thank you againyou are sure that it is c86 and not a c76?

[esx503]

you are sure that it is c86 and not a c76?Not 100% sure to be honest but from what I've been finding online it is a c86 and from what I can make out on the chip itself it looks like so as well

Sent from my SM-N950U using Tapatalk

[Cllau]

can you post here a clear photo of that chip?

[esx503]

can you post here a clear photo of that chip?That's the best I could do. I need to upgrade my equipment hahahttps://uploads.tapatalk-cdn.com/20180216/0c6bf63b5fa7a93d16f77e194b6ff4d3.jpghttps://uploads.tapatalk-cdn.com/20180216/ea46aa2ef0b1482e1e0212dae9671360.jpg

Sent from my SM-N950U using Tapatalk

[Cllau]

try read again as a c76...

[esx503]

ok here it is....

[Cllau]

original KM are ?

[esx503]

original KM are ?

yes sorry it is 40k i dont have exact miles

[Dr. Zoidberg]

ok here it is....
this does not look good either, with what tool are you reading? do you use 3,3 volt?

[esx503]

this does not look good either, with what tool are you reading? do you use 3,3 volt?

3.7 v is the default on smelecom usa prog. It reads it but it wont do calcuation to read miles it says 0 unless im tapping the wrong points im gonna double check right now.

[esx503]

this does not look good either, with what tool are you reading? do you use 3,3 volt?



ok this one i just read but Im not sure if it is corrupted which i think it is by now. it is reading 357 miles.

[esx503]

I think i got it can anyone please double check my work? this one is supposed to read 15k but i've no idea if it corrupted any other portion of the dump. see attached

[Dr. Zoidberg]

I think i got it can anyone please double check my work? this one is supposed to read 15k but i've no idea if it corrupted any other portion of the dump. see attached
15.231-------

[esx503]

Ok awesome on the previous 2 files upload were you able to see the miles? it showed 357 miles on usa prog but that is the original file and it read 40k in the car. Most likely i will need another dump and adjust the miles from that one. what do you think?

[FxShaw]

Ok awesome on the previous 2 files upload were you able to see the miles? it showed 357 miles on usa prog but that is the original file and it read 40k in the car. Most likely i will need another dump and adjust the miles from that one. what do you think?


Might be too late but try this i guess

[esx503]

Thank you i will try tomorrow and get back. thanks for the help yall

[esx503]

Might be too late but try this i guess

No good man. The miles are not coming up at all on the cluster when it is back in the car. any idea whats going on?

[Dr. Zoidberg]

No good man. The miles are not coming up at all on the cluster when it is back in the car. any idea whats going on?
try this....





507524

[FxShaw]

Well every time you post dump..the file always change so it's messed up to begin with..
I dont think its a good idea to try to write anyfile to it on board w/o being able to verify a good read after writing.

[esx503]

try this....

same thing.

[QUOTE=FxShaw;3217485]Well every time you post dump..the file always change so it's messed up to begin with..
I dont think its a good idea to try to write anyfile to it on board w/o being able to verify a good read after writing.


I have noticed that the very first dump is totally different from the last one I've read. I can't explain what i'm doing wrong.

[esx503]

I solved the problem. The chip was in fact a 93c86 I put the correct dump one that I found here on dk and everything worked perfect. Thank you all for trying to help me.

Sent from my SM-N950U using Tapatalk

[rukartinatv]

So did you change the miles with usaprog?
or just wright another dump
with new miles?

[rukartinatv]

Its 93c76
i saw your photo of the dash
93c86 difirent conection as show on v2

[BYTES]

C76 have done many, c76 did one this past Saturday c76 search on abacus.exe will tell you c76

[esx503]

So did you change the miles with usaprog?
or just wright another dump
with new miles?I didn't bother with changing the miles since u had already gotten a new cluster with the correct miles already in it. However when I put the new dump and read it as a c86 with usaprog it read the correct miles and confirmed it in the car.

Sent from my SM-N950U using Tapatalk

[esx503]

C76 have done many, c76 did one this past Saturday c76 search on abacus.exe will tell you c76So you think mine is a c76? [emoji848]
I just ordered a digital microscope for this exact same reason so ne t time I don't have the same issue in guessing what chip it is.

Sent from my SM-N950U using Tapatalk

[esx503]

Its 93c76
i saw your photo of the dash
93c86 difirent conection as show on v2I'm gonna have to double ck. It looks like it says 86 right on it

Sent from my SM-N950U using Tapatalk

[XmoDDeR]

C76 have done many, c76 did one this past Saturday c76 search on abacus.exe will tell you c76
here we ggo