RNS300 1k0035191D - Jlink v10

[chrisi1909]

Hi,

After trying for many hours, is there anyone that succussfully read
the Flash of this Unit with a original Jlink v10 EDU ?

We can connect, but how we try, but it doesn´t read even 1 Byte.
Throws a error and disconnects.

Is it even possible with this setup ??

[kowalskidebno]

Must setup special Jlink project for rns300

[ouragh]

read flash AM29LV640 with J.link

[chrisi1909]

the Connections are like that, if i choose to connect, it connects and if i don´t do anything it stays
connected for Minutes (maybe hours) , but when i want it to read anything,
like entire chip or even 1 Block, it throws error that it can´t read and disconnects.
I then can connect back, and round and round it goes.

[chrisi1909]

With the help of a very nice Person on DK, i got it read.

Maybe someone can decode it and tell me the code ??

[smoggy]

With the help of a very nice Person on DK, i got it read.

Maybe someone can decode it and tell me the code ??
try code 1890

[Ladis1510]

Hello,
could you help me with codes for RNS 300 please?

[shooting]

Hello,
could you help me with codes for RNS 300 please?
1 = 1540
2 = 0161
3 = ????
4 = 1300

wbr

[sanixmen]

3 = 1372...

[Ladis1510]

Thank you guys!!!

[grzyb26]

Please pin code

[kappa1]

Please pin code

Code is 1500

[mariantv]

HI can you help me reading rns300 with jlink

[mariantv]

hello.I tried to read with jlink, without succes

[mariantv]

-------------

[grzyb26]

Hi, Please pass
THX

[bogege]

Hi, Please pass
THX

code is 0724

[REZON]

Hi, Please pass
THX
I think code 0324 ....

[nelutzul40]

I get 0724...................

[shooting]

I think code 0324 ....

Bogege is correct, it's 0724 ;)

wbr

[grzyb26]

0724 ok
THX

[smarelo]

hello friends
can you help me please ?

I have jlink edu but i don't know what project choose.
thanks a lot

[grzyb26]

Hi
Please pin code

THX

[smoggy]

Hi
Please pin code

THX
try code 1059

[grzyb26]

ok, thx :)

[raptors]

Please code.
RNS300
Jlink sector 59

[carradio2001]

raptors (https://www.digital-kaos.co.uk/forums/member.php/75157-raptors) - bad reading or incomplete.

Carradio2001.

[raptors]

raptors (https://www.digital-kaos.co.uk/forums/member.php/75157-raptors) - bad reading or incomplete.

Carradio2001.
Thanks for your reply.
I read it identically twice.
I'll read the code with carprotool because my jlink segger manages to read something every 30th attempt.
If anyone has a solution to the error when reading from jlink let them post.

[shooting]

Thanks for your reply.
I read it identically twice.
I'll read the code with carprotool because my jlink segger manages to read something every 30th attempt.
If anyone has a solution to the error when reading from jlink let them post.

Wrong sector, post complete file...

wbr

[grzyb26]

Hi, Please code

[carradio2001]

code 1327 grzyb26 (https://www.digital-kaos.co.uk/forums/member.php/290867-grzyb26)
BR,
Carradio2001.

[grzyb26]

code ok, thx

[death9891]

hello please help setting the project rns300 connects but I can't read S29GL064A90TFAR2

[Andrey Pribalt]

hello please help setting the project rns300 connects but I can't read S29GL064A90TFAR2
in the settings, change the flash and select only one sector

https://www.digital-kaos.co.uk/forums/showthread.php/634072-RNS300-PIN-CODE/page2

[death9891]

Nothing of that,
needs a good RNS300 design


needs a proven design

[death9891]

someone with the project will help


rns300 S29GL064A90

or after SN

[death9891]

code please

[Raimax]

code please


1332 or 1336

[smoggy]

code please
code is 1336

[shooting]

1332 or 1336

I do not think so

Fis1 data
1332 = FE 59 2E F3 DA 3A 68 17
1336 = FE 59 2E D3 7A DA C8 37

Fis2 should share second byte with fis1

This data = 53 EE D9 3E 37 88 DA 3A

wbr

[Raimax]

I do not think so

Fis1 data
1332 = FE 59 2E F3 DA 3A 68 17
1336 = FE 59 2E D3 7A DA C8 37

Fis2 should share second byte with fis1

This data = 53 EE D9 3E 37 88 DA 3A

wbr

Your data string has no order

[death9891]

I'll check tomorrow the bytes must be reversed, according to the serine number........

[carradio2001]

Correct string from flash it is 3E D9 EE 53 3A DA 88 37 that means code 1336 and 3E D9 EE F3 xA xA x8 x7 = 1332

BR,
Carradio2001.
PS> Shooting, your Fis 1 codes are both correct.

[death9891]

Thank you all code 1336 OK 3E D9 EE 53 3A DA 88 37

[shooting]

Your data string has no order

Yes I see dump is a bad read, it is firstly BIT swapped then BYTE swapped...

wbr

[death9891]

Hello, I need the code rns300

0D 77 47 58 4E C4 34 85

[daniel53]

Hello, I need the code rns300

0D 77 47 58 4E C4 34 85

try code .................... 1478

[death9891]

thank you code ok

where you can buy a dump calculator for these radios

[death9891]

Hello, which programs have GOOD built-in
calculator vw nav RNS,MFD
ORANGE ?
NEO?
NYO?
???
except (Martech, CarProTool)

I like CalcGEN 2022
but you can't buy it anywhere

[daniel53]

Hello, which programs have GOOD built-in
calculator vw nav RNS,MFD
ORANGE ?
NEO?
NYO?
???
except (Martech, CarProTool)

I like CalcGEN 2022
but you can't buy it anywhere


you buy calgen 2022 from owner !!!!!!!!!!

[death9891]

you buy calgen 2022 from owner !!!!!!!!!!


It used to be that he didn't sell it. I don't know how now, who is the owner after all ??

carradio2001 ?????

[daniel53]

.................... pm please!!!!!!!!!!!!!!!!

[death9891]

.................... pm please!!!!!!!!!!!!!!!!

.................