immo off ecu VW IAW 4HV

[issam216]

NEED VIRGIN OR IMMO OFF IAW 4HV ECU I CHANGED ENGINE BECAUSE OF CAR CRASH AND I WANT TO ADAPT THIS NEW ECU WITH THE ORGINAL DASH of the car (old ecu is 1.2 engine and this new one is for 1.4 engine )

DUMP ATTACHED PLEASE

[rafal]

.........pin 33213

[brend]

Press thanks+rep
...100%......

......04851......or............4851.........

[issam216]

Press thanks+rep
...100%......

......04851......or............4851.........
IF I PROGRAM THIS PIN TO DASH AND MAKE A NEW TRANSPONDER THE CAR SHOULD START?????

[brend]

IF I PROGRAM THIS PIN TO DASH AND MAKE A NEW TRANSPONDER THE CAR SHOULD START?????

Dash data NEC/MICRONAS...?

[issam216]

DASH IS JHONSON CONTROL JCI+95320 I HAVE AVDI TO PROGRAM IT

[issam216]

Dash data NEC/MICRONAS...?

DASH IS JHONSON CONTROL JCI+95320 I HAVE AVDI TO PROGRAM IT

[brend]

Put dash dump.

[issam216]

Put dash dump. DASH DUMP JOINT THANX

[haroutioun]

Hello.
Dear friend, the ecu dump which you load it here in your first post it show you in bellow the immo result.
pin = 48513
cs = D2 53 E8 EC 4E 1E
mac = A8 2E 94 E9
vin = WVWZZZ6RZCY222589.
--------------------------
and the dash immo it show us the immo infos are the same as ecu, so did you try to adapt ecu to the dash = immo, or what the problem in the end???

[issam216]

Hello.
Dear friend, the ecu dump which you load it here in your first post it show you in bellow the immo result.
pin = 48513
cs = D2 53 E8 EC 4E 1E
mac = A8 2E 94 E9
vin = WVWZZZ6RZCY222589.
--------------------------
and the dash immo it show us the immo infos are the same as ecu, so did you try to adapt ecu to the dash = immo, or what the problem in the end???

Finaly i lost hope from this car i make the same observation than you and i made a key for the car and i add it to immo data and the adaption process finished successufly but when trying to start the engine the dash is showin SAFE and the car start and stop i think i have to give up this car, because the dash is jci nec +95320 for 2012 cars wih 1.2 engine and the ecu is for 2014 car with 1.4 engine and i think its can be suitable for adaption.... finaly i got tired for nothing thank all for helping me

[i_shot_the_sheriff]

Can someone please find MAC on this file ???? It's 4HV ecu from Polo ,

I found CS and PIN but can't find MAC :( ,,, I'm trying to put emulator and it asks for MAC

Thanks in advance