PDA

View Full Version : Peugeot 206 cc automatic


Pink192
21st February, 2018, 07:38 AM
I have had to get a donor Bsi/ecu as old one died. Donor had no code but do have vin number. How do I get code to reprogramme in digibox and how do I do it.
Donor vin is Vin number is
Vf32dnfur42170179. Thank you.
WinWoj
21st February, 2018, 07:47 AM
ecu without pin may be a problem... then could be an immo off making.
xOxOx
21st February, 2018, 08:11 AM
Would you use kess v2, mops or galletto for 206?
On bench or obd?
Shakeelbhugeloo
22nd February, 2018, 12:24 PM
read 29F400 and eeprom then immo off
Pink192
11th March, 2018, 07:57 PM
cheers for the replies, however I am not sure of any of this apart from using diagnosis on obd,

Immo immobiliser!

kess v2, mops or galletto?

read 29F400 and eeprom then immo off...... More info I don't understand., sorry.
xOxOx
22nd March, 2018, 10:37 PM
Digibox needs code card from dealer with v5 and driving license, to get past the immobilize. ECU needs to be put in boot mode to read the chips that hold the data. You could them read with a remapping tool like Kess, mpps galletto on the bench.

But be warned, taking any chip off the circuit bored is very hard, soldered smd, and glued on. Heat needed.

Don't know what ECU is in your car, but the edc15 need a chip (95p08) taking off to get in boot mode.