immo off 1.5 dci kangoo

[vladoford1]

Someone can make immo off for me
reno kangoo 1.5 dci delphi 8200513076 8200582518 dcm1.2
eprom 95160

[rafal]

only emu working with this ecu

[vladoford1]

only emu working with this ecu

Just to explain my problem to you.
When my father starts the car, the red immobilizer lamp remains on for an entire time. Do not blink.
When my father started a car without a chip in the key, the immobilizer lamp flickers

[vladoford1]

I bought the car the other day. the saller told me that he made two new keys and that the car worked before it. Now I can not get it started and I'll add that rpm shows 0

[rafal]

so car started without chip in key? maybe immo off allready?

[vladoford1]

so car started without chip in key? maybe immo off allready?
the car will not start

[vladoford1]

with chip inside red light all time on (not fleshing) car not start
with out chip red light fleshing car not star
if is immo good red light most go off?

[rafal]

go to someone who knows what to do because you will not to do by self

[vladoford1]

Question? why rpm is 0? why does not the red lamp go?

[whim]

only virgin ecu not immo off

[vladanr]

when red lamp flashing then is key problem,when light constant then engine ecu is problem.it can be power supply ,or engine relay or code(make virgin in flash)

[vladoford1]

can somebody make me virgin file for me.

[lion0304]

Red light stay on without flashing: Ecu bad or not detected by UCH.

Cleaning fuse and relay with sand paper in engine bay.

[vladoford1]

ok thanks gay. i tested tooday

[vladoford1]

can somebody make me virgin file for me

[vladoford1]

The immo red lamp lights on my car all the time. I found the problem on one relay, but I tried to put a virgin file before. now I have returned org file but still my red lamp is on. I looked at the diagnosis key recognized the code recognized but engine blocker is on

[lion0304]

The immo red lamp lights on my car all the time. I found the problem on one relay, but I tried to put a virgin file before. now I have returned org file but still my red lamp is on. I looked at the diagnosis key recognized the code recognized but engine blocker is on

If light still steady ON, better change ECU. Does diagnose detected your ECU?

Here is Virgin file, need coding Injectors.

[panos_k]

Hi, try to make injector coding.

[vladoford1]

I have a connection with diagnostics, but I can not erase faults codes normally I use delphi. i have to go through eobd to delete the fault code. it is possible that I have a canbus problem. uch gives me only fault code 55

[lion0304]

If DTC cannot erase, your ecu is hardware faulty. Change it and light go OFF.

[schouten1977]

here you have immo off if it help you dont forget thx + rep

[schouten1977]

try to do injector coding

[schouten1977]

i hat this issieu last time also

[vladoford1]

I inform everyone who helped me. I solved the problem. can bus line interrupted under the box of the fuse in the white connector