Yaris 2013 1.33 new mileage Km needed

[perilous]

Dear members I need new mileage from 23973 to 195000

[nikz]

here is your file

[perilous]

here is your file

Hello, something gone wrong. As a result I've got mileage like 999914 or similar. I'm using digiprog to loada eep file directly to eeprom. Car is Yaris gasoline 1.33 european version with manual gearbox. ODO is for kilometers.

[hexguru]

i think somthing wrong with writing, calculating ok. Is the reading file digiprog to? as i know files frome digiprog must be with swaped bytes

[perilous]

yes. original file was taken by digiprog with no changes and pasted here. So in my case I should swap bytes in file 195000.bin and change extension to *.eep and load it to digiprog and next to eprom?

[hexguru]

and next to eprom?No, check connections, try desolder eeprom, if your file original from digiprog

[perilous]

No, check connections, try desolder eeprom, if your file original from digiprog
Hello,
I had still the same problem, 999914 on my ODO so I asked guy who sold me digiprog for help. Se below what he sent me. Look at first line it's completely different. This file works fine and shows 195003. No soldering. What did I wrong before?
Regards
update - missing file

[hexguru]

In first line may stored 8 km , in your file in first line 3 km, in calculated file first line 0 km, if you copied first line from your file to calculated must show 195003, and if didn't worked before when you wrote 195000 km file means only your mistake in some actions