PDA

View Full Version : DIGIMASTER 3 - capable of erase m35080?


llanesluna
28th February, 2018, 03:41 PM
Hello pals,
I would like to throw this question to the persons who use Digimaster 3.
Its this device capable of erase m35080?

Thanks in advance
moffo
28th February, 2018, 03:58 PM
Hello,I have testet but not trying the 35080 eeprom:-(



Gesendet von iPhone mit Tapatalk
Happy786786
28th February, 2018, 04:06 PM
It can off board


Sent from my iPhone using Tapatalk
llanesluna
28th February, 2018, 04:28 PM
https://uploads.tapatalk-cdn.com/20180228/7e7a363435ebf32670a6e142cd5e40d7.jpg

Using this?


Sent from my iPhone using Tapatalk
Shakeelbhugeloo
28th February, 2018, 05:26 PM
NO i tried this but no success.. REad With UPA and Modify then send file to digimaster if needed
llanesluna
28th February, 2018, 07:02 PM
NO i tried this but no success.. REad With UPA and Modify then send file to digimaster if needed

So, have you tried multiple times or just once my friend? I haven’t used this before. I have UPA.


Sent from my iPhone using Tapatalk
mb7361
28th February, 2018, 07:06 PM
buy a serius device after u can
brend
28th February, 2018, 08:16 PM
Hello pals,
I would like to throw this question to the persons who use Digimaster 3.
Its this device capable of erase m35080?

Thanks in advance

I have this to, and no problem jet .Erase and write perfect.
With F-series bmw work perfect to and no problem jet.
brend
28th February, 2018, 08:26 PM
NO i tried this but no success.. REad With UPA and Modify then send file to digimaster if needed

......YES...or.....NO.........lol
Mate first you talk like no success.Then...... send file to digimaster........-----its mean send and write??
brend
28th February, 2018, 08:36 PM
For work with opel chip for erase firts 2 line use funktion like Modify data then Erase GLS ​.
llanesluna
28th February, 2018, 08:41 PM
For work with opel chip for erase firts 2 line use funktion like Modify data then Erase GLS ​.

It is for a BMW 328i - 2008


Sent from my iPhone using Tapatalk
Alawigmx
28th February, 2018, 09:40 PM
Yes it i very capable. I have done all kinds of 35080 chips with it. 3, 6, VP, every single one. Some of them take up to 5-10 minutes to get erased. This is because the unit keeps raising the mileage on the eeprom until 999999 and then it resets to 000000, thats why it takes time. Also, make sure your chip is aligned properly, no shorts (Use multimeter) and always remember, The bottom left pin (under the ST logo) is always pin 1.
llanesluna
28th February, 2018, 10:24 PM
Yes it i very capable. I have done all kinds of 35080 chips with it. 3, 6, VP, every single one. Some of them take up to 5-10 minutes to get erased. This is because the unit keeps raising the mileage on the eeprom until 999999 and then it resets to 000000, thats why it takes time. Also, make sure your chip is aligned properly, no shorts (Use multimeter) and always remember, The bottom left pin (under the ST logo) is always pin 1.

I do all my IC work with D3, I have never done any BMW, it will be my first time.
Thanks for the Feedback!!


Sent from my iPhone using Tapatalk