View Full Version : IAW59f IMMO OFF
leverage454
1st March, 2018, 07:52 PM
hiiiii
i need immo off or vergin file for fiat punto 1.2 with IAW59f ecu , thanx in advance
Pyromaniak
1st March, 2018, 08:29 PM
try this, press buttons if working :)
mikroel
1st March, 2018, 09:38 PM
hiiiii
i need immo off or vergin file for fiat punto 1.2 with IAW59f ecu , thanx in advance
file from previous post is not good ,
You must read full dump ( 320 kb) in boot mode otherwise immo off can't be done on file .
Or you can use some other tool as : Marelli decoder (cheaper tool for this type of ECU) , 2 minutes job ,
or Abrites ,I/O terminal etc....
leverage454
2nd March, 2018, 05:57 PM
try this, press buttons if working :)
thanx i will try and report
leverage454
2nd March, 2018, 05:58 PM
file from previous post is not good ,
You must read full dump ( 320 kb) in boot mode otherwise immo off can't be done on file .
Or you can use some other tool as : Marelli decoder (cheaper tool for this type of ECU) , 2 minutes job ,
or Abrites ,I/O terminal etc....
can i read this ecu in boot mode using ktag or galletto ?
rafal
2nd March, 2018, 06:39 PM
by boot mode you can read flash but not eeprom
mikroel
2nd March, 2018, 08:38 PM
by boot mode you can read flash but not eeprom
+100 full dump including EEprom + flash it can be read by boot mode ,use google and you will find how.
can i read this ecu in boot mode using ktag or galletto ?
FGtech galetto can do it , is not simple but ...if you can find Marelli decoder for easy way.
mikroel
3rd July, 2018, 10:58 AM
it is simple with this programmer
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.