Volvo XC60 mileage jumping

[musicman1488]

Hi all,

I'm having a problem with a 2015 Volvo xc60. I changed the mileage, but when i put the ignition back on it jumps back to the original mileage. Has anyone had this problem before?

Any help would be appreciated.

[Nicolas9]

would be nice to know which tool you used.
you need to block synchro with cem

[honingkoning]

would be nice to know which tool you used.
you need to block synchro with cem
You need synch block or do all modules (i think door module is causing it to bump back.

Wbr Adam.

[musicman1488]

I tried using enigma first then tried with smok and i also unplugged the front doors to see if that would work but it still bounced back.

[honingkoning]

I tried using enigma first then tried with smok and i also unplugged the front doors to see if that would work but it still bounced back.

I had the same situation on a v60, send flash to smok and he made me a new file and all was ok.

Wbr Adam.

[bugarcek]

I have totally same problem on xc60... I purchase xtool to do this job because they said that it will work... But it did not, I also done millage in door modules, But km Jumps back, because sw in not working... I tried more than 10 cars and none of them worked.... Now they claim that it works in this new year update, But ~~~~ this Update is 600 eur and I just bought it last year for 600 because of volvo and it did not work,...

So I am interested if someone can disable dash-cem synchro in flash?


Sent from my iPhone using Tapatalk

[honingkoning]

I have totally same problem on xc60... I purchase xtool to do this job because they said that it will work... But it did not, I also done millage in door modules, But km Jumps back, because sw in not working... I tried more than 10 cars and none of them worked.... Now they claim that it works in this new year update, But ~~~~ this Update is 600 eur and I just bought it last year for 600 because of volvo and it did not work,...

So I am interested if someone can disable dash-cem synchro in flash?


Sent from my iPhone using Tapatalk

I can remember the discusion in this forum, people saying not working, But finally it was working and it seems to be Some special instruction or modufication.

Cant remember exactly tou might check the xtool section.

Wbr Adam.

[bugarcek]

Yes Kermol says that it works in 2018 verson and say me that he can do it if I sendhim flash... I sent him flash a lot of times and newer get answer... I can not belive taht I actually throw away last year because he advertised how it is working.

So I please someone with x tool or any tool if he can read original flash and flash after it is blocked synchro- after millage change. I only need to do 2 cars and I not want to buy update from x-tool because I bought it last year... Better to buy smok than, it seems more okay

[sean us]

only safe way is can blocker i was try programming with all tool same story....have rool back mileage on one yolvo after one year

[bugarcek]

Where can get this can blocker?

[sean us]

Where can get this can blocker?
enigmatool have it

[Nicolas9]

please change your signature. it hurts my eyes

[bugarcek]

I searched for can blocker on engimatool site but Volvo is not listed. Can I use any can blocker? I looked for that gecko can but volvo is not listed

[honingkoning]

I searched for can blocker on engimatool site but Volvo is not listed. Can I use any can blocker? I looked for that gecko can but volvo is not listed

Vendoquadros have it

[bugarcek]

But if I understand the situaton correctly.

Smok, x-tool only block synchro dash->cem this block is done in car cluster...

So if I have flash readen from this car, the only thing which I need is to change few bytes and flash and km will stay on cluster.

Problem here is because noone does not know what to change or maybe do not want to share.