PDA

View Full Version : Ford EDC17C70 Read / Write



sdtsedat
6th March, 2018, 10:31 AM
Hi people,

Someone have experience with new Ford EDC17C70? Anyone read/write this? OBD or tricore on bench?
Wich tool?

I know K-TAG geniune can do this

Ignasvw
6th March, 2018, 12:45 PM
Cmd shows that it can be done by obd CAN. LOL
On tricore options there isnt edc17c70

sdtsedat
6th March, 2018, 12:54 PM
I bought Kess V2 master geniune, i am asking if its possible to do by obd.
Car is from my father and he have warranty at Ford dealer.

Is this a problem to tune it? Can Ford see it?

voltechcar
6th March, 2018, 03:16 PM
its no possible, I write again, this ecu have otp how you write this ecu? Use k-tag genuine he do it

GianniNOS
6th March, 2018, 03:49 PM
Alientech write: kess only write, ktag read and write

kospoz
10th June, 2018, 09:15 PM
I had one of this ecu and try to read it but was very difficult because ktag (original) showing boot pin at the bottom from tricore!!!6 pin from tricore!

voltechcar
10th June, 2018, 09:44 PM
Sedat tune car his father, r/w kess genuine by obd.

alcorte
10th June, 2018, 10:11 PM
magic can do edc17c70 by obd /boot

bitmaster123
11th June, 2018, 04:21 AM
I confirm. Last week I made a focus E6 1.5Tdci_120HP with Edc17C70 via OBD with X17. All went fine.

kospoz
11th June, 2018, 06:43 AM
clone 5.017 can do it?because kess 2.26 sw i read that can do it by obd or only original?

alcorte
11th June, 2018, 08:51 AM
I would not try. but....

sdtsedat
11th June, 2018, 12:47 PM
Clone cannot do, i have tryed. Kess V5.028 clone shows, but no working.
Original kess do this without problem and read/write fast.

thanks to voltech, car is now very good and no problems at Ford Dealer.

Car have 4000KM