vw beetle error 00003

[Citrina]

6q0 909 605 af
hw sw 06 09
please help clear error 00003

[naprawa5]

Try it.................

[Citrina]

Try it.................

Not help
Same error 00003

[dragon100]

Check this, if not work, then your srs unit is damage ...

[Citrina]

Check this, if not work, then your srs unit is damage ...

Thanks
Problem solved with member help ,but can tomorrow compare or this solution same

[auto80]

ok, m8

Cheers :)

[Citrina]

Check this, if not work, then your srs unit is damage ...s
compare files, you solution ok
Thanks

[VWfan]

Hello, I need a pinout for:

6Q0 909 605 AC or AF pls
because I have the same error 00003.

[VWfan]

OK, I'm a little further, now I can read the SRS modules with VCDs!
552492I Completed the picture a little bit.

[VWfan]

please help clear error 00003

[VWfan]

one more with the same issue 6Q0909605AC 00003 pls

[joker01]

I also had problems with 00003.
even with clear ok, after a few days the error 00003 could be solved by changing the ecu.
00003 is an internal ecu error I did not understand if hw or sw.
comuque try this maybe you have more luck than me.
thank you and let us know ....

[joker01]

p.s with that pinout read e2p from vcds ???

[VWfan]

e2p what is it?

[VWfan]

Thank you very much. This one worked for me, error 00003 is gone :-) Could you also please make one for the other?

[joker01]

e2p = eeprom
For the other file look at the mods of my clear and report them on that ..


press button thanks

[VWfan]

ok,i will tried.

[VWfan]

Yes!!! thanks for the tip.. ..it works, ..00003 is gone!

[VWfan]

no, i only needed this pinout for bench.
i read the e2p wih ch341a usb flasher.

[VWfan]

No,I only needed this pinout for bench. I read the e2p with ch341a

[limaluk]

Hi. 6q0909605 ac and af are the same modules? can I use them interchangeably? cheers

[VWfan]

Hi, it's me again with the exact same error i had a year ago.
found the same defects on both modules, but i dont know whether they are resistors or not.

[slawekfixroy]

I also had problems with 00003.
even with clear ok, after a few days the error 00003 could be solved by changing the ecu.
00003 is an internal ecu error I did not understand if hw or sw.
comuque try this maybe you have more luck than me.
thank you and let us know ....

Dump is OK but the prolem may be joint resistors 221.

[VWfan]

yes, it was the resistors 221 on both modules, solved by soldering.