PDA

View Full Version : I need ori file 6S71-12A650-BF MONDEO TDCI



wbart
8th March, 2018, 06:22 PM
Hallo Mates
I need ori BDM mpc555 file mondeo 2.0 tdci 115ps 2006 6s71-12a650-bf

thanks

maajkii
8th March, 2018, 06:32 PM
Hallo Mates
I need ori BDM mpc555 file mondeo 2.0 tdci 115ps 2006 6s71-12a650-bf

thanks

here you go.
no pass

wbart
8th March, 2018, 09:02 PM
I Need full BDM
Yesterday I read and write this ecu obd by galletto v54 and ecu dead. I write by BDM maajkii file mpc555 and any change. No starter and immo diode blink normal , no fast.
ANy solution?
Help mates

dominik.m
8th March, 2018, 10:10 PM
If You have FGtech clone? This happens often!

maajkii
8th March, 2018, 10:29 PM
aaa... i posted OBD read.. sorry i dont have BDM read...
i always make this ecu via obd but genuine tool

dominik.m
8th March, 2018, 11:01 PM
Wbart upload Your ori file .

wbart
8th March, 2018, 11:41 PM
ori file read by obd

wbart
8th March, 2018, 11:49 PM
any solution no working
ecu diagnostic by obd is ok. in cluster error bus communication. Car no cranking and immo diode flashes always the same in ignition on and off. When ignition on in cluster mileage stay 10s than only ------.
What can i do?
ANy idea?

wbart
8th March, 2018, 11:55 PM
Yes I have weak china clone, and i have good clon kess 5.017 and kess writing no protocols to this ecu.
I have first time this problem
I was lazy, I could take a katag and now i have a problem

dominik.m
9th March, 2018, 12:09 AM
Your ori file it's ok.
Are You try write ori with another tool?

wbart
9th March, 2018, 12:28 AM
Your ori file it's ok.
Are You try write ori with another tool?Ok. But i traing write by obd galletto this ori file and no change. I tray write by bdm galletto majjkii file and no change.
So what's going on?
Maybe galletto corrupted other file? Eeprom???
I'm stupid. I don't no what happened.

Wysłane z mojego SM-G390F przy użyciu Tapatalka

sdtsedat
9th March, 2018, 03:46 AM
Your eeprom is damaged. You need full bdm to recover the ecu.

Hope that someone have it for you..

Verstuurd vanaf mijn SM-G955F met Tapatalk

wbart
9th March, 2018, 08:17 AM
My file ori by obd is smaler from majjkii by obd.
And majjkii file galletto by bdm writing ok , my file no writing and reports dimension file.
I find in forum ori file by bdm eeprom end micro , i writing all by bdm and any change.
Test galletto obd and reports start data reading ERROR.

wbart
9th March, 2018, 11:06 AM
aaa... i posted OBD read.. sorry i dont have BDM read...
i always make this ecu via obd but genuine tool


I think your file is BDM because this size is like galletto by BDM

wbart
10th March, 2018, 07:52 PM
Problem solven
ECU reprog with IDS and mondeo live.





Thanks for help majjkii and dominik.m :applause::applause:
:applause:

savaciprian
22nd March, 2021, 07:29 PM
Hello I need too this file, please help...

savaciprian
25th March, 2021, 11:32 PM
I need file 6S71-12A650-BF

:rolleyes: Please...

Thanks