EDC16CP33 Nissan Qashqai - does it work via OBD in KESS v2?

[marsbar]

Hi,

Does KESS v2 support EDC16CP33 over OBD for reading and writing? I have read some posts which suggest there is an issue with injector codes clearing on read and write, is this also the case when using KESS?

thanks :D

[voltechcar]

today tune by obd without problem....

[marsbar]

today tune by obd without problem....

Thanks, I use an older version of KESS. Mine is firmware 5.017 and Ksuite 2.23 I believe.

[autoSP]

make sure u read injector codes first

[marsbar]

make sure u read injector codes first

Thanks, how do I do this in kess?

[ilkertdi]

Thanks, how do I do this in kess?


Reading ok. But cp33-cp34 is really so hard ecus on obd2.
Magpro2x17 was kill a edc16cp34 on obd.
If you have ktag, you can do it with bdm method easly.
But you have only kess, turnoff the dashboard for 3 minutes after writing.


Also, you must use power supply for remapping. Car voltage will like 13.5v.

[Ignasvw]

make sure u read injector codes first
Clear your inbox, i cant reply to your message

[mikroel]

Also Galetto v54 can easy read/write this ecu by BDM . I did many without any problem.


Sent from my iPhone using Tapatalk