PDA

View Full Version : Focus 1.6TDCI



Topman000
9th March, 2018, 12:40 PM
HI members.

I need good solution for DPF off for this ECU

1.6TDCI EDC16
0281 012 487
8M51-12A650-MC

THX in advance :giveup:

ohkarol
9th March, 2018, 01:27 PM
your file dpf off
pass pm

Topman000
9th March, 2018, 01:53 PM
Switch ok but In ECU is fault

P2455 DPF senzor faultly
U0118 FACM comunication failed

ohkarol
9th March, 2018, 02:05 PM
dtc erase, try connect/disconnect additive module under back seat

Topman000
9th March, 2018, 02:17 PM
ok.i will try.thaks.

Topman000
9th March, 2018, 04:09 PM
U0118 FACM comunication failed - active dtc

FACM is conected

Topman000
9th March, 2018, 04:54 PM
Hi.
I need tested solution without FACM

Fuel additive pump is Faultly and FACM disconected

THx in advance

chafik4051
9th March, 2018, 05:05 PM
try and report,

xCata
9th March, 2018, 05:18 PM
Try these one.

Topman000
9th March, 2018, 05:30 PM
chafik4051 all is ok but dtc p1455 is in ecu .DPF senzor disconected

maajkii
9th March, 2018, 05:46 PM
i think you do sth wrong.
i always use switch solution, than clear facm with diagbox, disconnect facm under back seat and all working well...

Topman000
9th March, 2018, 06:00 PM
XCat good job.Thanks to all. :eagerness:

Topman000
14th March, 2018, 10:24 AM
Hello everybody.
I found a little error - the car isrunning and it doesnt show any fault on diagnostics.

After first start up lights ondisplay ENGINE FAULT and the car doesnt have a power.

After second start up everything isok, no error and with power.

I have updated SW by IDS

FACM is disconnected.


Thanks in advance

ohkarol
14th March, 2018, 10:50 AM
Probably eeprom error (configuration corrupted). Flash again with IDS then send file to me i will do a proper DPF off file.

Topman000
14th March, 2018, 11:59 AM
first dump is after update with IDS

ohkarol
14th March, 2018, 12:03 PM
first dump is after update with IDS
flash it again to repair eeprom error...

Topman000
14th March, 2018, 05:23 PM
last flash

Topman000
14th March, 2018, 06:28 PM
HI members.please help me.
I dont have any other options...

Vasily.U
14th March, 2018, 10:06 PM
dei.......

Topman000
15th March, 2018, 09:19 AM
Vasily.its the same.

First start ENGINE SYSTEM FAULT , but engile light turn off.second start all ok.FACM is disconected
DTC P2584 facm defect and U0118 facm comunication
I need 1000% tested sonution.
many many thanks

Vasily.U
15th March, 2018, 10:07 AM
Sorry m8, i have a little mistake. Pass the same.

Topman000
15th March, 2018, 04:28 PM
Not work.
This is last full flash with IDS.Must be ok.DPF is on.only dtc in PCM p2585 - fuel additive control module
please off DPF and DTC correctly
THX

Topman000
15th March, 2018, 05:00 PM
the car is running correctly but it show fault on display.Engine control light switched off.


:giveup::giveup::giveup:

ohkarol
15th March, 2018, 06:19 PM
REFLASH AGAIN WITH IDS!!!!!!!

Topman000
15th March, 2018, 07:03 PM
last file is reflashed with IDS.SOLVED. Thaanks Vasily.U

Topman000
16th March, 2018, 03:03 PM
all ok.....