KessV2 v4.036 grey protocol after token reset.

[curtislee1994]

513029513030 513031

Hey guys I could do with some help here.

Ksuite stated I had only 9 tokens left and wouldn’t work anymore. I have redone the tokens and all seems well apart from all the protocols are greyed out.

I have tried everything I can think of with no luck what else could I try?

I’ll try add images soon

[dtip]

use new SD card

[curtislee1994]

With the new SD card how do i go about doing it?

Just insert it into the Kess then launch Ksuite?

[curtislee1994]

use new SD card

Or do i need to add something to the SD card?

[curtislee1994]

UPDATE:

Tried a fresh SD card same issue

Added new files to the SD card from a forum still same issue

Am i right in thinking it needs a new NXP? :/

[maajkii]

ok so solution is simple

insert new SD card
use kess 2.08 program
then run normal ksuite..

working!

[curtislee1994]

I have tried this and it no work :/

Also sometimes the car is greyed out then if I relaunch program it works again...

I really don’t know what to do haha

[curtislee1994]

So this is what I just did...

1. Remove SD card from kess
2. Insert new SD card (formatted no data)
3. Plugged in kess to laptop
4. Reinstalled ksuite 2.08
5. Launch ksuite
6. Still greyed out :/

I also have a issue where sometimes I can’t press the car? I have to keep restarting ksuite for it to work again

[Ignasvw]

My solution. Put any other sd card. Use 208 setup to update plugibs and tokens. When everything will update , put back old sd card back.


Sent from my iPhone using Tapatalk

[maajkii]

and, remember you always need unrar fresh version of 2.08 than use it...

[curtislee1994]

Okay so again...

I tried this one more time.

1. Uninstalled all ksuite etc
2. Redownloaded new ksuite 2.08
3. Removed SD card from kess
4. HDD low level formatted the SD card
5. Reinstalled ksuite
6. Launched ksuite and same issue.

Am I doing something wrong?

[maajkii]

i can help you with teamviewer, but tomorrow.

[Stelaras26]

i uploaded this ...use this reseter...use this version of ksuite...
Update protocols,and tokens...Then start program..Let it update...
And you are good to go...!

[PowerPlus]

work also with same old sdcard! :peaceful:

[curtislee1994]

Thank you!

[curtislee1994]

I will try this thank you

[sinbrad]

Can't get the resetter to work it comes up with an error saying file not found on all selections?