PEUGEOT 107 IMMO SYNCHRO PROBLEM

[kuboa]

Hi
I have problem with Peugeot 107 immo
The car starts for 2 seconds
There is only one fault code in ECU P0880 b2799 fault in communication with the immobiliser control module
I checked the wires from ECU to IMMO. They're ok.
I tried To synch ecu and immobox,turn ignition, connect Obd 4 and 13 with wire but don't work
Can someone have a look to ecu dump immobox dump.
Thanks a lot

[wissamshaat]

check wires againe
i have a car with same problem. there is 2 wires from ecu to immo box that have to check verry good

[kuboa]

The two ECU wires to IMMO 12 to 78 and 13 to 83 are good