BMW E46 320d ews3 - dde7 sync

[atd]

Hello,
I'm working with Bmw E46 320d. Car no crank. When I try to sync ews3 with dde7 it appears fault "Ecu rejected".
Interface - Inpa, ncs expert. In ecu still i see fault 4A42 - ews interface error.
Can somebody sync for me these files?
I appreciate any help.
Thank you in advance.

[brend]

Cheksumm error in ecu eeprom.

[atd]

Are you able to count this cks? or give a hint which software make this. ?

[kono]

read flash from dme. 29fXXX post it

[bram380]

Hello,
I'm working with Bmw E46 320d. Car no crank. When I try to sync ews3 with dde7 it appears fault "Ecu rejected".
Interface - Inpa, ncs expert. In ecu still i see fault 4A42 - ews interface error.
Can somebody sync for me these files?
I appreciate any help.
Thank you in advance.

write ews & ecu,
then start the car.
Good luck

[atd]

I programmed bram380's dumps. Engine didn't want to crank. Then I made new key, engine cranks but no start. In ews seems to everything ok, in dde two faults 46D1 and 4A63.
Could it be hw problem or checksum problem in eprom?

[kiszka]

..........

[atd]

Car started everything now is ok. Thank you for solving the problem.
I used ews3 dump from bram380 and helped me kiszka's dump for dde with counted checksums.
In my situation 46d1 fault were caused because of bad checksum in 95160.
One more time thank you guys.