help with my sonde can clip

[morfeo]

hi guys, i have problem with my sonde can clip clone...
i have try with clio without can and work good, but on my megane 2 with can not work...why?thank
clip version is 92

[sixpack]

hi guys, i have problem with my sonde can clip clone...
i have try with clio without can and work good, but on my megane 2 with can not work...why?thank
clip version is 92
fist start with translating the error windows in you SW to English

[zeca]

Boa noite
O problema pode n?o ser da sonda e para detectares vais ter de desligar os calculadores um por um inje??a?, uch,airbag,abs etc...at? conseguires entrar em diagn?stico sei que h? um valor homico que se pode medir na tomada de diagn?stico mas n?o me lembro do balor nem das vias

[zeca]

Good night
The problem may not be the probe to detect and you'll have to shut down one by calculating an injection, uch, airbag, abs etc ... until you get into diagnostic know there's a homicidal value can be measured in making the diagnosis but I do not remember balor or airway

[zeca]

Good Day

You have the dialogys? gives a look at the MR394-88B clio 3 which speaks of the multiplexed network but if you want you can go off trying 1calculador at a time while trying to enter diagnostics. ok

[Amine13]

HI mate, I had similar problem, and the CAN Clip sonde was faulty...

[zeca]

good night

but it works well in clio megane is because you have a problem I think

[morfeo]

in all renault of can i have problem? i have try with another can sond and work fine!!
problem is in my can clip!!

[djbojan]

Everything can be repaired,

i had problem on 2 can clip-s, K lines were faulty,

but i think i can solve problem on CAN

[morfeo]

but i think i can solve problem on CAN


How? thank

[zeca]

but you have a problem with megane to try and diagnose

[autoemerson]

Hi guys
I have same problem with my Clip but my sonde work just on Can cars and not on older cars.All seems be ok recognize the VIN number but wen I try start diag. refuse work on fact just stay.

[4legs]

did somone know the soulotion of this problem
please help
thanks guys

[pkatra]

hi
:confused:
i?m a problem to conect my clip working,error is : sond not detected

when i instal de clip software only ask me 2 drivers and only! turn led on ??can????bat??usb??
led off ??iso??

Is normal?
i supose can clip is china version never work?s
:confused:
tks

[obdmaster]

hi
:confused:
i?m a problem to conect my clip working,error is : sond not detected

when i instal de clip software only ask me 2 drivers and only! turn led on ??can????bat??usb??
led off ??iso??

Is normal?
i supose can clip is china version never work?s
:confused:
tks

iso led should be lit also m8