PDA

View Full Version : Immo Off me1.5.5


jsg1200
21st March, 2018, 12:03 AM
Hi Guys.

I need immo off for opel corsa C.

Me 1.5.5 - 0 261 207 423.

Itīs posible by Software, or Can I need change emprom?


Thanks! ;)
cubica1
21st March, 2018, 02:24 AM
why you need immo off...it is very easy adapt new ecu, as well as make new transponder...PIN you can find into IPC easy...
regards,
cuby
jsg1200
21st March, 2018, 10:55 AM
why you need immo off...it is very easy adapt new ecu, as well as make new transponder...PIN you can find into IPC easy...
regards,
cuby

Good morning.

What are the steps to match the new ECU?
WHAT machine do I need? Any special one?

Thank you
jsg1200
21st March, 2018, 11:00 AM
Its posssible with T-300?
cubica1
21st March, 2018, 04:07 PM
you can use Opcom...
On the first go to IPC (instrument cluster) and into eeprom menu read eeprom and find PIN code...
go to immobiliser, enter security code (PIN) and reset ECU and install again..
reset BCM, reset IPC..start the car.
rgds,
cuby
jsg1200
21st March, 2018, 04:37 PM
I can't donwload this file.

The link sends me to the login page, I put the credentials, but it does not come out of there...

Regards ;)
Pyromaniak
21st March, 2018, 06:30 PM
with carprog read pin if you have donor ecu.(for reset ecu with opcom you need old pin from ecu)

if you find and change eeprom in this ecu---> you are god :)
jsg1200
21st March, 2018, 10:40 PM
with carprog read pin if you have donor ecu.(for reset ecu with opcom you need old pin from ecu)

if you find and change eeprom in this ecu---> you are god :)
jajajajajajajajajajajajajajaja

Hi.
I dodnt have the old pin of new ECU, only have the pin of car.


If i try erase the ecu for new programming, The program get error and error of communication.

I have a galletto v54, mpps, t-300, opcom, autel...

Regards ;)
jsg1200
22nd March, 2018, 08:35 PM
Hi.
I got the pin from the scrapping unit, with the OPCOM, I do all the procedures, it tells me that it is ok.
There are no failures in immo.
But the car does not start, the indicator of the car with a key flashes, and the reserve indicator flashes.
It also gives failure, p0120, P0220 and p1616.

Ideas?
Pyromaniak
23rd March, 2018, 09:47 AM
Throttle Pedal Position Sensor/Switch (TPS) "A" Circuit Malfunction p0120


trouble code definition Throttle/pedal position sensor/switch circuit B malfunction p0220

http://www.digital-kaos.co.uk/forums/showthread.php/461857-Corsa-C-P1616-wrong-vehicle-id-from-instrument-control-module-(00)-Present