suzuki grand vitara 2008g 1.9 disel

[rtvservis]

nead dpf remuwe
0 281 012 657
sv 1037381585

i have 2 option on ads dpf remover v2017.05
edc16c3-ddis
edc16c3-10

I did both options. can somebody look up. which option is ok
if not ok pleas som to du dpf off .
thenx

[rtvservis]

it is working i didnt tested

[chipdanix]

Hi

Your file dpf off

515555

[voltechcar]

So I see all solution for this car and check him in winols, all is bad, cut dtc with temperature sensor EGT turbo pressure, when he destroy car sometimes not have power and off course not dtc in ecu. Only manual solution is good, all temperature sensor must disconnect and emultead, differetnial pressure always have 15mbar pressure. This is my opinion

[rtvservis]

PROBLEM CAR NOT START EROR INJECTOR 2. AND .3 AND 4 .
ON ORG FILE CAR WORKS VITH DPF EROR

[johak]

here you go

[furnata]

Here your file working
pass PM

[maajkii]

just checked, ddis function is allmost good..
just this one EGT sensor is wrong for me...

[rtvservis]

johak (http://www.digital-kaos.co.uk/forums/member.php/146881-johak) file demage can send again

[maajkii]

use new winrar..

[voltechcar]

if you need good solution not automatic software write to me, I cut 3 dtc and emulated all sensor. This is my solution and works great

[rtvservis]

still have problem with this car . i need SVIFTEC solution pleas

[AVDigitale]

try this and report pass in PM!

[maajkii]

still have problem with this car . i need SVIFTEC solution pleas

here is your request...
pass pm.

[rtvservis]

solwed with sviftec file. programed file off dpf with chipdanix file. the car worked for two days. then the motor ecu ded. found the motor ecus of reno lagune 0 281 012 588 memorized flash micro and eprom. the car start does not have any faults.

[voltechcar]

swiftec? you see what he do in file? you have cut dtc and emergency mode not alse, this is bad solution................ very bad

[AVDigitale]

swiftec cut half dtc codes in this ecu and will work 2 or 3 days not more ,always need good manual solution ...

[rtvservis]

I was working on a car with sviftecom 7 months ago. I called a man to ask if there were any problems. says the car is running without any problems

[voltechcar]

check file what he done and write, than we speak hes quality, ok ?

[rtvservis]

this suzuki possesses keyless. but i can only start with the key in contact svitch. any solution

[maajkii]

make key coder with galletto.
AVdigitale, from where you take this info?
I use swiftec for this ecu XXX times, no problems.
Maybe you talk about your ADS solutions, for shure car working without problems with swiftec.

[rtvservis]

car start with smol key when insert in contact svitch . bat not start with keyless sistemy .

[pawel7924]

DPF REMOVER solution working... I was tested, if you have unerasable dpf errors, read/write by obd by kess (ecu was reseted), don't forget save injectors coding

[voltechcar]

really you think is good solution, disconnect 1-rst temp sensor on turbo and check his power..........

[AVDigitale]

i don't think is not working with swiftec,but in some cases and swiftec don't work properly
ads i didn't tried in this ecu and i don't try because always is best solution winols best regards

[voltechcar]

what you write in this topic, swiftec and ads working, who for you check how he edit file and in car how much dtc cut ???. Really I must use button printscreen and upload what all this software do in edc16c3 renault ecu ???