PDA

View Full Version : suzuki grand vitara 2008g 1.9 disel



rtvservis
21st March, 2018, 11:14 AM
nead dpf remuwe
0 281 012 657
sv 1037381585

i have 2 option on ads dpf remover v2017.05
edc16c3-ddis
edc16c3-10

I did both options. can somebody look up. which option is ok
if not ok pleas som to du dpf off .
thenx

rtvservis
21st March, 2018, 01:04 PM
it is working i didnt tested

chipdanix
21st March, 2018, 01:04 PM
Hi

Your file dpf off

515555

voltechcar
21st March, 2018, 01:20 PM
So I see all solution for this car and check him in winols, all is bad, cut dtc with temperature sensor EGT turbo pressure, when he destroy car sometimes not have power and off course not dtc in ecu. Only manual solution is good, all temperature sensor must disconnect and emultead, differetnial pressure always have 15mbar pressure. This is my opinion

rtvservis
23rd March, 2018, 02:02 PM
PROBLEM CAR NOT START EROR INJECTOR 2. AND .3 AND 4 .
ON ORG FILE CAR WORKS VITH DPF EROR

johak
23rd March, 2018, 02:44 PM
here you go

furnata
23rd March, 2018, 02:44 PM
Here your file working
pass PM

maajkii
23rd March, 2018, 02:56 PM
just checked, ddis function is allmost good..
just this one EGT sensor is wrong for me...

rtvservis
23rd March, 2018, 03:01 PM
johak (http://www.digital-kaos.co.uk/forums/member.php/146881-johak) file demage can send again

maajkii
23rd March, 2018, 03:02 PM
use new winrar..

voltechcar
23rd March, 2018, 10:45 PM
if you need good solution not automatic software write to me, I cut 3 dtc and emulated all sensor. This is my solution and works great

rtvservis
29th March, 2018, 09:03 AM
still have problem with this car . i need SVIFTEC solution pleas

AVDigitale
29th March, 2018, 10:30 AM
try this and report pass in PM!

maajkii
29th March, 2018, 10:38 AM
still have problem with this car . i need SVIFTEC solution pleas

here is your request...
pass pm.

rtvservis
29th March, 2018, 11:42 AM
solwed with sviftec file. programed file off dpf with chipdanix file. the car worked for two days. then the motor ecu ded. found the motor ecus of reno lagune 0 281 012 588 memorized flash micro and eprom. the car start does not have any faults.

voltechcar
29th March, 2018, 12:09 PM
swiftec? you see what he do in file? you have cut dtc and emergency mode not alse, this is bad solution................ very bad

AVDigitale
29th March, 2018, 01:51 PM
swiftec cut half dtc codes in this ecu and will work 2 or 3 days not more ,always need good manual solution ...

rtvservis
29th March, 2018, 02:05 PM
I was working on a car with sviftecom 7 months ago. I called a man to ask if there were any problems. says the car is running without any problems

voltechcar
29th March, 2018, 02:13 PM
check file what he done and write, than we speak hes quality, ok ?

rtvservis
29th March, 2018, 02:16 PM
this suzuki possesses keyless. but i can only start with the key in contact svitch. any solution

maajkii
29th March, 2018, 02:39 PM
make key coder with galletto.
AVdigitale, from where you take this info?
I use swiftec for this ecu XXX times, no problems.
Maybe you talk about your ADS solutions, for shure car working without problems with swiftec.

rtvservis
29th March, 2018, 02:44 PM
car start with smol key when insert in contact svitch . bat not start with keyless sistemy .

pawel7924
29th March, 2018, 02:53 PM
DPF REMOVER solution working... I was tested, if you have unerasable dpf errors, read/write by obd by kess (ecu was reseted), don't forget save injectors coding

voltechcar
29th March, 2018, 02:53 PM
really you think is good solution, disconnect 1-rst temp sensor on turbo and check his power..........

AVDigitale
29th March, 2018, 02:57 PM
i don't think is not working with swiftec,but in some cases and swiftec don't work properly
ads i didn't tried in this ecu and i don't try because always is best solution winols best regards

voltechcar
29th March, 2018, 03:03 PM
what you write in this topic, swiftec and ads working, who for you check how he edit file and in car how much dtc cut ???. Really I must use button printscreen and upload what all this software do in edc16c3 renault ecu ???