PDA

View Full Version : Bitedit Arctic Cat. Boost limiter



makri
22nd March, 2018, 09:53 PM
Hi

Anybody here have experience with Bitedit?

I have the Arctic Cat module for my snowmobile, but there is a boost cut I cant figure out.
I cant get more than 1 bar boost before I get boost cut. Whatever I sett the 2 boost limiters too the result is the same.

The two maps are named "Boost Limitation via engine speed and load" and "Boost pressure limitation".

I have also tried to contact Bitedit about this issue but they are just ignoring my requests and emails!

It is a Denso 32920-49XC1 ecu


https://farm1.staticflickr.com/805/26087395017_500d8e5146_b.jpg (https://flic.kr/p/FKfHEH)

https://farm1.staticflickr.com/820/40066059535_d43399cee7_h.jpg (https://flic.kr/p/243v2BV)

https://farm1.staticflickr.com/807/40066059405_59405f69f2_h.jpg (https://flic.kr/p/243v2zF)

makri
26th March, 2018, 10:20 AM
If I upload the bin file can anybody look for a missing boost limiter in the file?

Very frustrating that Bitedit are just ignoring my requests and emails.

David
17th November, 2023, 04:26 PM
It looks to me like you have the 0283STC0 map loaded, which I think is for the newer Cats with the Mitsubishi ECU.

Did you ever resolve this?