PDA

View Full Version : Edc17c46 error micro protection removal fail



sdtsedat
24th March, 2018, 01:10 PM
I try to read Audi A4 2.0tdi 2012 edc17c46
Car is mapped with kess slave in a company but now dpf is cutted, and now dpf light is on.

So i will do dpf off but i can't read with Ktag.
When i choose p269 familie it give error also same error in p199

What can we do? I dont like use galletto...
In attachment screenshot

Anyone have this situation? How to solve?https://uploads.tapatalk-cdn.com/20180324/0494666a5d72400178a4f0ecb53f5cff.jpg

Verstuurd vanaf mijn SM-G955F met Tapatalk

bersch8688
24th March, 2018, 05:14 PM
K-Tag rework?
Car start?

voltechcar
24th March, 2018, 05:27 PM
this ecu have problem, sometimes have problem boot on the table. I have 2 cars with this problem, be obd Kess and next car. When you have car which not stering relay fuel pump the same, ecu die. This is normal

sdtsedat
24th March, 2018, 08:08 PM
update: i try with fgtech v54 eu 0475 same situation, locked protected with password. Unlock tprot 08/10 not work.
So do it by obd

If someone have this situation you need virtual read and write by obd

Thanks to Voltechcar

mapexo
19th October, 2018, 09:04 AM
idem error problem vw passat edc17c46 sw.03L906018PR 9980!! plugin failed p199 and p269! can I safely write with the kess lecture virtual and write?

sdtsedat
19th October, 2018, 09:06 AM
Yes it works

Verstuurd vanaf mijn SM-G955F met Tapatalk

kospoz
19th October, 2018, 09:22 AM
ktag original?because in the past with clone i had same problem with original all ok.

mapexo
19th October, 2018, 09:29 AM
how long does it take to write the kess? ecu have HW: h27!

sdtsedat
19th October, 2018, 09:32 AM
Around 30min

Verstuurd vanaf mijn SM-G955F met Tapatalk

rexer
19th October, 2018, 09:36 AM
did u solve it? have same problem

Inquizit0r
19th October, 2018, 09:54 AM
Are you reading previous posts? Use P199.
And reworked KTAG unit.

mapexo
19th October, 2018, 10:36 AM
plug p199 used and not worked! ecu have tprot password!

chli1976
19th October, 2018, 10:11 PM
Have also the same problem. K-Tag reworked 2.23_7.020.
Car has mod + DPF + EGR off from a other tuner, but car is smoking and it seams all DTC are removed, so i will read it and look in the file but can not read it with K-TAG clone.
Ori Byteshooter also doesn`t read it

mapexo
20th October, 2018, 02:17 PM
Around 30min

Verstuurd vanaf mijn SM-G955F met Tapatalk

kess write WORK! thankyou sir for response topic

Ignasvw
20th October, 2018, 04:33 PM
You say you have cmd. Cmd works without problem. you have PWD read function and READ

chli1976
20th October, 2018, 05:04 PM
Today i tried it again with Byteshooter and K-Tag with protocoll 199 and 269 but don`t work. 03L906018HT_9977 so itīs a file after skandal


So i flashed new software with Odis-E 03L906018HT_9978. After this i can read it with K-Tag (clone) and protocoll 269.


So i think the tuner before had done anything like anti read, but i don`t know it.


Now i made manual DPF off and smoking is gone

Gery
9th November, 2018, 10:53 PM
ktag , trasdata (ori) not readed
mpps v18 read-write perfect .
1.step Tprot worked normal mod , white out resistors .
2.step read - write boot mode /white out chks/