View Full Version : VOLVO S40 1.6 HDI FAP - need to fap off, and have only mpps v21 ! How to do ?
gasman78
24th March, 2018, 07:58 PM
Hi all,
I need to do a FAP OFF on my Volvo S40, and i only have a MPPS v21. How can i do this ?
I try by OBD but i can't read ECU...
I try pin boot with tricore but i only have default and ID read, nothing when i try to read a complete flash or just eeprom...
I there a solution with pin boot and other pin under the ECU ? i open ECU but i don't find anythink on the web for do this with MPPS !!!
Is there a solution by cabling the K-Line or CAN H and L to tricore with ECU on the car to unlock access to ECU ?
Thank's for help
Gilles (french, sorry for my english !)
maajkii
24th March, 2018, 08:06 PM
is it 16c34?
if it is just do it by bdm with galletto or ktag.
gasman78
24th March, 2018, 08:52 PM
Yes, ut's a EDC16C34 !
i read somewhere that it fan be possible to read flash by cabling the k-line for pin on Écu to obd plus !
Vasily.U
24th March, 2018, 08:56 PM
Yes possible but ECU must be on car not on bench
voltechcar
24th March, 2018, 09:11 PM
be obd eep and flash, no need remove from car.
gasman78
24th March, 2018, 11:06 PM
How to do this ? You say by obd, and you do this with Mpps v21 without any change ?
if you do this, can you give me a process ?
thanks
gasman78
25th March, 2018, 10:25 AM
Hello
I stay with same problem... i try with K-Line plug and i can receive ECU ID
It's a Bosch EDC16C34/3.30 MPC562/RevC CC_OFF
I try with Tricore soft but no result... i have only ECU ID with mpps, by choose a Peugeot or Citroen 1.6 110 Fap EDC16c34
When i try to read after receive ECU ID, result is always : Sub fonction not supported or invalid format
Any idea ?
voltechcar
25th March, 2018, 10:58 AM
no china shit, genuine tools and 10 minutes to do this job.
gasman78
25th March, 2018, 11:06 AM
Not sure this help me... china chit as you say do the wright job for other car, like opel astra for me !!!
I read a lot of post with problem with Volvo, may be someone have a good result with mpps tools, that's what i need !
Thanks
Vasily.U
25th March, 2018, 01:16 PM
I don't have v21 but v16 read ford edc16c34 via k-line and can, need select c-max
gasman78
25th March, 2018, 03:39 PM
i try with v16 and v21 with same result on Volvo, but EDC16c34 on a Citroen wok's fine...
I think Volvo make change to block all tunning...
rh03
25th March, 2018, 04:48 PM
do it on bdm, it's more safe !
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.