PDA

View Full Version : BMW E46 1.8 Valvetronic ME 9.2 dtc off



AUTODIAGNOZA
25th March, 2018, 12:25 PM
Hello!
I want to erase two dtcs in this file.
The errors are:
2715 - Oxygen sensor heater before cat bank 2
271D - Oxygen sensor heater before cat bank 1
Thank you!

icezero2010
26th March, 2018, 01:46 AM
here test and report

iīm not sure i have done it not with remover

AUTODIAGNOZA
27th March, 2018, 10:21 AM
Thank you very much!

AUTODIAGNOZA
28th March, 2018, 08:21 AM
Worked great. Thank you again!

AUTODIAGNOZA
28th March, 2018, 12:37 PM
Bad news: after driving a while, the errors came back and check engine is on again.
I found the errors tabel in hex, so i will try to disable them from there.

icezero2010
28th March, 2018, 09:45 PM
Bad news: after driving a while, the errors came back and check engine is on again.
I found the errors tabel in hex, so i will try to disable them from there.

what dtc is now inside

AUTODIAGNOZA
29th March, 2018, 03:15 PM
Same dtcs.

Cloudforce
1st January, 2020, 04:36 PM
Bad news: after driving a while, the errors came back and check engine is on again.
I found the errors tabel in hex, so i will try to disable them from there.


Any further info on that?

jurebv
1st January, 2020, 09:15 PM
https://s4wiki.com/wiki/Tuning#Cat_and_O2_complete_removal_and_DTCs

Cloudforce
2nd January, 2020, 05:30 PM
I donīt wanna get rid off the DTC, i want to code it out cleanly.

jurebv
2nd January, 2020, 06:40 PM
Did you even read the article? Its all extcept deleting dtc...

Cloudforce
2nd January, 2020, 06:43 PM
Did you read it? Does it contain any valuable info on valvetronic? Well, obviously not as its ME7.

jurebv
2nd January, 2020, 07:58 PM
First of all you should read this topic which actually has nothing to do with valvetronic off...author wants 2 cat dtc off...you should read before writing....secondly you did not mention also you want valvetronic off...you should write what you want...thirdly you need damos for disabling valvetronic and some experience with damos usage...id really recommend anyone who has no experience with motronic to just unplug eccentric sensor and delete dtc