PDA

View Full Version : ford cmax 2.0 tdi sid803 need egr off



barteczekk
27th March, 2018, 12:40 PM
hi guys need egr off with disconnected plug. asc 2017.05 wont working car wont start.

bugarcek
27th March, 2018, 12:46 PM
Try this maybe your problem only checksumm

barteczekk
27th March, 2018, 12:48 PM
Try this maybe your problem only checksummI try mpps kess (split and join) also bdm and trasdata. After prog car wont start.

Wysłane z mojego SM-J320FN przy użyciu Tapatalka

kennyash1
27th March, 2018, 12:49 PM
here you go mate report

kennyash1
27th March, 2018, 12:51 PM
if still trouble maybe cheksum problem?

bugarcek
27th March, 2018, 12:52 PM
Again ADS solution...

kennyash1
27th March, 2018, 12:54 PM
Again ADS solution...

I have not yet had issue with this ecu? is his non starting problem due to this fault?

bugarcek
27th March, 2018, 12:55 PM
I have not yet had issue with this ecu? is his non starting problem due to this fault?

I also did not have problems with this solution.

However my upper post is same file with cheksum calculated


Sent from my iPhone using Tapatalk

barteczekk
27th March, 2018, 12:55 PM
bugarcek you correct csk in ori file ? all this same.

bugarcek
27th March, 2018, 12:56 PM
yes... Compare the files.

kennyash1
27th March, 2018, 12:57 PM
I also did not have problems with this solution.

However my upper post is same file with cheksum calculated


Sent from my iPhone using Tapatalk

ah bugger sorry mate, thanks

barteczekk
27th March, 2018, 12:58 PM
ok when trasdata ask me to correct csk press yes or no ?

bugarcek
27th March, 2018, 12:59 PM
In this case- no

barteczekk
27th March, 2018, 01:14 PM
Got error p060C car wont start any idea ?

Wysłane z mojego SM-J320FN przy użyciu Tapatalka

Ignasvw
27th March, 2018, 01:51 PM
Yes, its not crc problem. Fuel quantity on start is 0. Thats why. ads not work, swiftec also

barteczekk
27th March, 2018, 01:56 PM
Yes, its not crc problem. Fuel quantity on start is 0. Thats why. ads not work, swiftec alsoI tryed change fuel quantity and set values as oryginal still this same. Any one got working solution ?

Wysłane z mojego SM-J320FN przy użyciu Tapatalka

Ignasvw
27th March, 2018, 01:59 PM
Unplug egr valve

Ignasvw
27th March, 2018, 02:02 PM
One more file with crc deleted

barteczekk
27th March, 2018, 02:28 PM
crc working. thx a lot