CCam Info

[Curious123]

Just wondering how some of you people are monitoring your C/S shares and servers. I have tried using CCCam Control centre 1.5 but that fails with an error about the cam not running on the box. I downloaded CCCcam Info.ph .86 yesterday and was trying to use that but I kept getting 'an unable to conect error. If someone is using the latter could they please tell me where I might be going wrong? @DF if this post is inappropriate please feel free to edit or delete as you see fit.

[Devilfish]

@DF if this post is inappropriate please feel free to edit or delete as you see fit.

No probs m8, it's a very good question in which alot of people I'm sure are interested in a few answers. :)

[^^MaXiMo II^^]

I had no prob to install cccam php on my pc with xp but many problems with a vista laptop i dont know what OS you using and what error do you get.
May i advise you to use original version of this tool by my friend toogoody as the one you mentioned is a modified one.

[Curious123]

I was having trouble connecting with webinfo so I reflashed my Dm500S , re-installed my CCCam 2.0.9 cam and config file after posting the new thread . I have just tried the CCCam info.php and it has logged on me on perfectly now so can only assume a corrupt CCCam config file was causing the problem.

[^^MaXiMo II^^]

Cool im glad it worked for you cccam php is a must tool for everyone using this emu
ciaooo

[shqiptaria-cccam]

Hi mate i haven the samme problem in may box ..

Problem was in ccca.cfg config wen i change the pasword ore 16001 port or somthing in may cccam.cfg cccam.info dont workit and wen i reinstall cccam complit and only mov the c-line and f-line nothing more the workin may cccam info wery god

The problem its in cccam config line ??!!!

Only reinstal and dont change This congig all will be ok '

# The telnetinfo service can be protected with a username and password.
# This is switched off by default
#
#TELNETINFO USERNAME : <username>
#TELNETINFO PASSWORD : <password>

# default port for telnet is 16000
# default port for web is 16001
# supported commands:
# info
# activeclients
# clients
# servers
# shares
# providers
# entitlements
# example use:
# echo servers | telnet localhost 16000
# go with your browser to http://ip_CCcam_server:16001
#
#TELNETINFO LISTEN PORT : 16000
#WEBINFO LISTEN PORT : 16001

# time in seconds to keep On Screen Display active.
# default is 0 (turned off)
#
#ZAP OSD TIME : 3

# username used to show popup (default : root)
#OSD USERNAME : root

# password used to show popup (default : dreambox)
#OSD PASSWORD : dreambox

# port used to show popup (default : 80)
#OSD PORT : 80

[^^MaXiMo II^^]

For example
If your CCcam server is : local IP 192.168.0.6
And you have enabeled this lines in your CCcam.cfg
WEBINFO LISTEN PORT : 18011
WEBINFO USERNAME : login
WEBINFO PASSWORD : gimper400

Then your line in config.php will be configured like this?..

$CCCamWebInfo[] = array("192.168.0.6","18011","login","gimper400"); //

[Curious123]

Does the webinfo port need to be forwarded on the router?

[^^MaXiMo II^^]

Does the webinfo port need to be forwarded on the router?
depends very much on your router settings i found on some netgears with old firmware for some reason i have to open the webinfo port but ususally you should not
ciaoooo

[felicianf]

Is this connected to cccam info which has to be FTPed to the Dreambox via PC and manually installed?
I have done this and working excellently.
It gives server details at any given time on the press of the yellow button on the DM.