PDA

View Full Version : Iveco Daily 35C12 EDC16C39 dead after remap!!!



Rusinov87
29th March, 2018, 07:30 AM
Hi to all members!I made a tunning and EGR off on this BUS and everything was fine.......but after a few weeks customer came to me and wanted to put back original software.I try write it with KESS like the first time but ERROR occure when writing!Try recovery but nothing happens..now when i give KESS to find ID it says generic error!!I take out the ECU and readed on BDM but what i saw is that flash is realy realy empty!Could some one help me and join the two files (once readed at first time by OBD whit KESS when everything was OK and other readed whit Galleto on BDM when the ECU is dead)and help me start that vehicle!Thank you in advance!

bobolin4o
29th March, 2018, 07:46 AM
Here...
BTW... I can't imagine, that you can do tuning, DPF... but you can't merge two files...
Regards!

Rusinov87
29th March, 2018, 07:49 AM
Thanks mate i try and report back

johak
29th March, 2018, 07:51 AM
write this with BDM

tugishrugish
29th March, 2018, 07:52 AM
Your original file

Rusinov87
29th March, 2018, 08:00 AM
bobolin4o (http://www.digital-kaos.co.uk/forums/member.php/150906-bobolin4o) whit your file Bus don't start i will try whit others and post resault

bobolin4o
29th March, 2018, 08:10 AM
johak's file is same as mine, the other is different software version.
Did you try if there is comm. with the ECU after flashing mine?

Rusinov87
29th March, 2018, 08:13 AM
johak i wrote your file but no sucsess again (http://www.digital-kaos.co.uk/forums/member.php/146881-johak)

Rusinov87
29th March, 2018, 08:14 AM
no i will try and let you know

Rusinov87
29th March, 2018, 08:21 AM
Yes i have a communication but immo lamp light and glow lamp blinks

bobolin4o
29th March, 2018, 08:22 AM
Which DTC's have in the ECU?

Rusinov87
29th March, 2018, 08:23 AM
i cannot tell very correct because i read it whit LAUNCH and it gaves me (please research before continue)
i will try whit AutoCom and let you know

Rusinov87
29th March, 2018, 08:39 AM
I try whit AutoCom but no communication.......i dont know whit what tool to read this Bus

bobolin4o
29th March, 2018, 08:42 AM
AutoCom must read this ECU just fine.

Rusinov87
29th March, 2018, 08:44 AM
OK i will try whit one one my colleague to see what will happend

Rusinov87
29th March, 2018, 10:37 AM
No friend and whit other autocom no diagnostic......what can i do now

maajkii
29th March, 2018, 10:56 AM
i can make immo off for original flash if you need.

piemot
29th March, 2018, 11:03 AM
your ecu was bricked while you opened it maybe. If you havent communication immo off wil not help you. If you write ori file and bus wont start you will need new ecu and the do immo off.

Rusinov87
29th March, 2018, 11:30 AM
Piemot i have some file from this forum and the bus start but EDC light flashing so please mate maajkii if you can make immo off on original flash i will try and report thank you

piemot
29th March, 2018, 01:03 PM
Post this file to immo off. I can make you