PDA

View Full Version : BMW E60 error


r_parev
29th March, 2018, 04:58 PM
Hi, please help with this error- A3B6 in combi instrument.
"Message error ( data storage Condition Baset Service, 0x394), receiver instrument panel, transmitter CAS"
The instrument cluster shows the km that are in the CAS, the km in the instrument cluster are displayed in 1 second while the car starts only.

BMW E60,2005,530D

Km in CAS "309424"
Km in tacho "89900"
tacho shows -309424

i change km, but

Km in Cas "0"
km in tacho "209400"
tacho shows -0



Thanks
SKYTON
29th March, 2018, 05:55 PM
can post bin files ?
br
r_parev
29th March, 2018, 06:46 PM
can post bin files ?
br


Here are all the files......
brend
29th March, 2018, 07:49 PM
km set no good.
What km need?how much you need?
r_parev
29th March, 2018, 08:00 PM
209400km please.
brend
29th March, 2018, 08:06 PM
Cas good.only dash no good.
Red dot up to??
brend
29th March, 2018, 08:13 PM
If red dot up.I think dash vin not same , what in cas.Its mean dash dump in another car.
Put this ........
r_parev
29th March, 2018, 08:23 PM
I did not pay attention to a red dot.
Tomorrow I will try with new dump and report.
Thanks.
r_parev
29th March, 2018, 08:27 PM
Vin in CAS.........
brend
29th March, 2018, 08:29 PM
I know .
In dash CX14XXX
r_parev
29th March, 2018, 08:36 PM
Thank you, you are very right, I did not pay attention to this detail

ps

Now I remember, the owner said , the cluster and mileage had changed a long time ago.
eliaselias
30th March, 2018, 07:28 AM
Hi, please help with this error- A3B6 in combi instrument.
"Message error ( data storage Condition Baset Service, 0x394), receiver instrument panel, transmitter CAS"
The instrument cluster shows the km that are in the CAS, the km in the instrument cluster are displayed in 1 second while the car starts only.

BMW E60,2005,530D

Km in CAS "309424"
Km in tacho "89900"
tacho shows -309424

i change km, but

Km in Cas "0"
km in tacho "209400"
tacho shows -0



Thanks


i had the same problem before...same symptom with red dot....
problem was fixed by coding dash again to the car...if you have clone fvdi it can do the job... after coding you need to remove plug of dash then reput again... then your dash will work ok and the real mileage will appear and the red dot will dissapear....
step is so simple ... if you need more info let me know...good luck
r_parev
30th March, 2018, 05:31 PM
Problem is resolved, thanks to "brend" - inserted correct VIN into a dash dump.
Thanks to all for help.