Help about edc15c2 virgin or i**o off without 5p08

[Patrick190e]

hi, my shitty tl866CS cant write over 5p08 so i can't virgin the dump, if i try with 95080 i can read but not write... if y try with 95040 the code repeats and wont work. i have no money to buy another beauty programer like UPA...

can anyone help me? is there any good guy with knowledge or magic?

CAR: citroen xsara picasso 2.0 HDI RHY 2004 with EDC15C2

MY HARDWARE:
LEXIA-PP2000
TL866CS
HANDS
all adaptors.

PLS HELP!!!

[Patrick190e]

help anyone??????

[rafal]

what can i say? :hmmmm2:
maybe some day cars will run without wheels.

[kiszka]

..........

[rob h]

Read with xprog, 100%.
To write, take of board.

Maybe you could Read it by obd, using fvdi?

[Patrick190e]

eeprom must be read as 95p08 not 95080

yeah but my cheaper tl866 dont have 95p08 :(

[Patrick190e]

Read with xprog, 100%.
To write, take of board.

Maybe you could Read it by obd, using fvdi?

yeah but in my country those beautys are not aviable...

[rafal]

M8 nobody will not help you if you don't have proper equipment.

[Patrick190e]

M8 nobody will not help you if you don't have proper equipment.

yeah i know, sorry guys thanks anyway

[rob h]

Did you remove the eeprom, before you tried writing it?

[Patrick190e]

Did you remove the eeprom, before you tried writing it?

YES! i remove the 5p08c3 to try a reading, after that i resolder and car still wont start... so i compare with another dump and i discover my programer repeat the code after some bytes, so, today i try reprogram the 29f400bt with another dump from the forum and i remove 5p08 and car START!

buuuut... after some minutes of happines a wild ECO MODE appeared, put my lexia and for some reason the ecu won't comunicate with the bsi. f*ck.

i try a telecode without success, in the ECU telecode section BSI option says: BSI Filial/ absent and absent. i tryed both without succes, the engine starts but still no comunication with BSI, the bsi cant read parameters from ECU so decides put all in eco.

i try telecode the referential number (now its 0000000000) without succes aswell.

PD: BSI comunication its good (at my point of view) cause all other equipament still works fine (ABS, AIRBAG, RADIO, CLUSTER, CLIMATE etc.)

i only need a clue

[kiszka]

..........

[Vasily.U]

citroen xsara picasso 2.0 HDI RHY 2004 has 3 plug ecu. Why you touch 95p08? For immo off need only flash. Back 95p08 ))) If you want virgin ecu , you can read and write 95p08 in boot mode with k-line adapter.

[Patrick190e]

citroen xsara picasso 2.0 HDI RHY 2004 has 3 plug ecu. Why you touch 95p08? For immo off need only flash. Back 95p08 ))) If you want virgin ecu , you can read and write 95p08 in boot mode with k-line adapter.

wich one?????

[Patrick190e]

im looking for a Smps Mpps V13 Edc16 Chip Tuning Remap K + Can Flasher
can i reprogram my 5p08 edc15c2 with this???... i can buy it, its not so expensive for my pockets :)

[Vasily.U]

Solder 95p08 back.
1. If you want immo off need change only flash 29f400
2. If you want virgin ECU read 95p08 like in my post in this thread http://www.digital-kaos.co.uk/forums/showthread.php/295407-Help-peugeot-307-2002-immo-edc15c2-bosch?p=3213536&viewfull=1#post3213536

[Patrick190e]

Solder 95p08 back.
1. If you want immo off need change only flash 29f400
2. If you want virgin ECU read 95p08 like in my post in this thread http://www.digital-kaos.co.uk/forums/showthread.php/295407-Help-peugeot-307-2002-immo-edc15c2-bosch?p=3213536&viewfull=1#post3213536


Escaner Vag Com Kkl 409.1 Usb Obd2 Seat Skoda Vw Scanner ??????

[Vasily.U]

Should work....

[Patrick190e]

Should work....

ok, i buy it now and test... im not familiar with those true slav kkl cables :)

[Patrick190e]

Should work....

AND IT WORK!!!!!!!!!!!!!!!!!!!!!!!!!!!

VASILI YOU ARE A GENIUS!!!!!!, now the car start like a UAZ with a full tank of vodka... my wife is so happy with their new fully funccionally citroen xsara picasso.

thanks Master.