View Full Version : EDC16C34 - Peugeot 307 1.6 Hdi no power
oliva
2nd April, 2018, 02:49 PM
The car lost its power after replacing the driver. What could be the reason? Errors through diagbox are F000, F408.
The "check" indicator has appeared.
Peugeot 307 SW 1.6Hdi (2008)
https://obrazki.elektroda.pl/4325761500_1522676905_thumb.jpg (https://obrazki.elektroda.pl/4325761500_1522676905.jpg)
ohkarol
3rd April, 2018, 09:52 AM
p0408 is egr related error,
oliva
3rd April, 2018, 11:23 AM
Could it be because some map of egr is removed in ecu?
ohkarol
3rd April, 2018, 12:33 PM
Could it be because some map of egr is removed in ecu?
P0408
Exhaust gas recirculation (EGR) valve position sensor B high input
Wiring short to positive, EGR valve position sensor, ECM
egr has electrical fault
oliva
3rd April, 2018, 01:53 PM
How to solve the problem?
ohkarol
3rd April, 2018, 04:57 PM
check the wiring, if its ok - replace egr valve or switch it off correctly in ecu .
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.