w202 1999 ecu virgin

[fricker]

Hi, need help with immo on ecu , EIS changed , need off or virgin
1999 2.2 cdi
ECU engine A0265450332
BOSCH 0281001881
EEPROM 24C04

thanks

[pepi]

Here you go virgin dump after you write dump you will need to adapt with MB Star diagnose.

[fricker]

is there some way add immo without MB Star diagnose ?

[rob h]

Immo emulator can do this.

[fricker]

cant get me smart how to erase ESL its on car cant remove them , after erase it shall work with any EIS right?

[fricker]

FVDI shall erase old ESL on car to open it , but cant find how to connect to it , there is just on EIS K-line but its replaced and will not work with old ESL
how to erase old ESL ?

[fricker]

have add JULIE as emmu on ecu , EIS and ESL replaced , ignition work dash turn on , central locking work from remote
BUT start not work, no reaction on start position, tried other EIS to, all same
any ideas ? where to disconnect CAN ? on EIS or ECU ? do it sync on K-line ? need it remove to ?

[rob h]

If the esl does not match. Simply place a esl emulator. From Codecard Smok, or Chinese.
And simply make your ecu eeprom virgin. So it will match your ezs.

[fricker]

dont have MB Star diagnose to match ECU to EZS
is there some emu for ecu A0265450332 ???

[rob h]

http://smok.com.pl/index.php?id_cms=8&controller=cms&id_lang=2

CR1 emulator, Smok.

And a cheap fvdi 2014, might also work to synch.