MB E200CDI W210 DTC Removal

[andykala]

Hi all!
Have car MB E200CDI W210 85kw -02
EDC15C6
HW : 0281010848
SW : 1037351709
Otherwise works ok, but after short driving and giving a throttle following DTC and limpmode :
P0100-128 B2/5(Hot film MAF sensor) Plausibility 4, current and stored (read with Launchtech CRPMOT)

If possible remove DTC to get car working and make chks (used old mpps shit for this one) i would be grateful :)

Attached is file.
BTW. file is tuned and EGR already off and unplugged (non electric egr).

[Dietrich]

You have to fix it, if you want to have good torque and power.
Deleting DTC is not the best solution!

[andykala]

Yes, i think also same. Btw MAF is checked and working fine so;

Not my car but this had first problem with intake flaps & motor. Owner fixed it with some resistor or smtnhg, first DTC was if remember right P1189-016 from flaps, no that anymore cause of that resistor he put in flap motor and flaps removed.
Read about if flap motor is broken this MAF DTC (P0100-128) will appear.

Is this ECU solution for flaps off and get rid of resistor shit and probably then get rid of that MAF dtc also?

[Dietrich]

Where do you live (country)?

[andykala]

Finland, why so :)