Super Tacho !!!!!!!

[PremierD]

Have any of our Members come across or used this ....
Super Tacho Correction Machine---AUTOSKY (http://www.autonumen.com/product_show.asp?id=2036)

Claims to do a lot ....but does it.....????

My clone has died looking to replace it ...

Thank-you in Advance for any pointers of course..( just Checking to see if M.H. is on line) bugger he is ...:hahaha:

[u.s]

when i asked ecutool about the super tacho i was asked not to order it yet as it still had some problems the manufacturers were trying to sort out.
have you had a look at the digimaster II, don't know what it is like though...
http://www.autonumen.com/product_show.asp?id=1778

[PremierD]

when i asked ecutool about the super tacho i was asked not to order it yet as it still had some problems the manufacturers were trying to sort out.
have you had a look at the digimaster II, don't know what it is like though...
DIGIMASTER II FULL SET---AUTOSKY (http://www.autonumen.com/product_show.asp?id=1778)

Thanks mate ..looked at it ...Kind of old hat ... I can do everything that it does just now ..More interested in the fiat suff by OBD and A4/A5 .... EDC16 mileage by OBD ect ....Dont want to buy DP3 ... to fcukin expensive ..and I don't like the P***k that sells them up here...Although it is the one to have ... ( although the Consult II guys will disagree..and the Enigma.......you get the picture ...)
I Can do most of it Anyway just looking to save time ...

[z786]

Have any of our Members come across or used this ....
Super Tacho Correction Machine---AUTOSKY (http://www.autonumen.com/product_show.asp?id=2036)

Claims to do a lot ....but does it.....????

My clone has died looking to replace it ...

Thank-you in Advance for any pointers of course..( just Checking to see if M.H. is on line) bugger he is ...:hahaha:

Hi,
the chinese hav done it agen! lol
this time they cloned the dashcoder
here is link for original website (i was kind enuff 2 go 2 the trouble to put the translator in 4 u)

Google Translate (http://translate.google.co.uk/translate?hl=en&sl=de&u=http://www.dashcoder.com/&ei=X_z5Sti1BJWI4Qbuw8G1Cw&sa=X&oi=translate&ct=result&resnum=1&ved=0CAgQ7gEwAA&prev=/search%3Fq%3Ddashcoder%26hl%3Den)

Jus check it out, obviously the clones wont do evrything the original does, always gna have teething problems, to be honest iv neva spoke 2 any1 owning one of these so cant say much on how good it is

[PremierD]

Thankyou mate .... You dont't happen to have prices do you... or do I contact Dashcoder..?

[z786]

Thankyou mate .... You dont't happen to have prices do you... or do I contact Dashcoder..?

erm i think its around the 4 grand mark but im NOT sure so dont get any heart attacks lol

its best 2 email Dashcoder and cut the middleman out!!

also coz im in a good mood i got you a link with it in action

YouTube - 912tool's Channel (http://www.youtube.com/user/912tool)

check out all the vids, but they are kind of blurry, makes you think why.

[PremierD]

erm i think its around the 4 grand mark but im NOT sure so dont get any heart attacks lol

its best 2 email Dashcoder and cut the middleman out!!

also coz im in a good mood i got you a link with it in action

YouTube - 912tool's Channel (http://www.youtube.com/user/912tool)

check out all the vids, but they are kind of blurry, makes you think why.

Ta mate ,,,yep a bit blurry .... Is tha ?'s or euros ....? The clone's about 2k ...$ ....Without discount ... I'll e-mail them tomorrow...

[necora]

Thanks everybody it?s a very interesting conversation, I?m full of happy to ear yours words:D

[z786]

Ta mate ,,,yep a bit blurry .... Is tha ?'s or euros ....? The clone's about 2k ...$ ....Without discount ... I'll e-mail them tomorrow...

Like i sed im nt sure, some1 told me price long time ago, but i think thats in ?'s

[scooby99]

Well ave got a DP3 very good tool ,and i deal with the bloke your talking about ha ha ....as for the Enigma tool very good too,and the last one Diga pro works fine too, all will do somethings the others wont do..........

if you wish the full dashcoder from germany it will cost 11000 thousand euro lot of cash

cheers

scooby99

[u.s]

new tools out to do fait by obd, VIP Price $225
China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1777&sortsid=3503&sorts=Odometer%20Correction)

also, Vauxhall/Opel ECU mileage change by OBD, VIP Price $237
China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1785&sortsid=3503&sorts=Odometer%20Correction)

both cables and software look similar.
wonder if the fiat software will work with the Opel cable and vice versa.

[PremierD]

Well ave got a DP3 very good tool ,and i deal with the bloke your talking about ha ha ....as for the Enigma tool very good too,and the last one Diga pro works fine too, all will do somethings the others wont do..........

if you wish the full dashcoder from germany it will cost 11000 thousand euro lot of cash

cheers

scooby99

Well mate you'll know what I mean then.....

[fes_786]

new tools out to do fait by obd, VIP Price $225
China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1777&sortsid=3503&sorts=Odometer%20Correction)

also, Vauxhall/Opel ECU mileage change by OBD, VIP Price $237
China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1785&sortsid=3503&sorts=Odometer%20Correction)

both cables and software look similar.
wonder if the fiat software will work with the Opel cable and vice versa.

they both clone versions

orignal is made by smok

orignal is cheap plus latest software and free updates
chinese is poor quality
old software .etc

[u.s]

can't see how original is cheaper mate?
do you have any links?

OPEL EDC16 Tool - 400 EUROS - SMOK (http://www.smok.com.pl/index.php?lang=en&id=oferta&kategoria=1&produkt=22)

FIAT TOOL - 290 EUROS - SMOK (http://www.smok.com.pl/index.php?lang=en&id=oferta&kategoria=1&produkt=20)

[iso]

I buy Opel EDC16 Tool original from Smok and my impresion is not good .
First, the quality of interface is poor, chinese look better than this Smok original.
Second, in the website you see and belive all that car will be made if you pay 400euro's, but you can't access all that function.
Available is only EDC 16 Bosh ECU's and old K-line dash, but inside adapter you will find big surprise, pin-8 for Vectra B dash and pin-12 for Astra G; Zafira A; Meriva; Agila; Corsa; ... dash are not connected :hmmmm2: .
Other ECU's like ME 7.6.2; MT 35; HFSI22 - Opel petrol car's and PSG16 - diesel CAN engine are not availlable. You must pay more and more money...
Customer suport is poor, i try all week to contact Smok but no answer ...:dontknow:

So, if you don't have anything better to do with 400euro buy Smok interface !:motz:

[glk96000]

Hello iso and all,

please send your experience with smok interface on this thread

http://www.digital-kaos.co.uk/forums/f68/experiences-opinion-original-no-official-interface-no-chinese-clone-interface-66303/

[spaske]

I bought Fiat OBD from smok... cheapest OBD connector but it worked OK. Smok is hard to contact. no answers on email, no aswers on Skype... I had to send him SMS on Polish language just to order !
First chinese copy of Fiat OBD is not from smok, its from radio-dekoder, also polish.... original is 200 Euros, supports Fiat Stilo ( I don;t see it in chinese software).. Like all Polacks, he is also difficult to contact

[iso]

@kam306, now all is ok, mr. Smok solved that bug on my interface. About experience to operate this software i have no problem's, is very easy to use.

For the future i can see only one problem, for any other new function it must be payd 250Euro... :(

[manit]

Thankyou mate .... You dont't happen to have prices do you... or do I contact Dashcoder..?
the clone is just over 2000 us and the original one just over 4000 euros and thats straight from Dashcoder and thats a basic model in i think germany

[z786]

mate plz read the date of the last post before you reply
your jus bumpin up old threads