PDA

View Full Version : Opel Y17DT



episcop
10th November, 2009, 11:15 PM
Any body know, what type of memory in this hybrid, and how to read? I'm need reactivation this.

kasim_izmir
12th November, 2009, 07:52 PM
Any body know, what type of memory in this hybrid, and how to read? I'm need reactivation this.

Hi very easy read and write eeprom . 25160
i will send virgin dupm for Y17DT

carsolution
12th November, 2009, 09:26 PM
Hi.
It can also be 25320.
Regards,
Nuno

episcop
13th November, 2009, 10:39 AM
Ok, any have foto for pin solder for programmer?

kasim_izmir
13th November, 2009, 12:21 PM
Hi.
It can also be 25320.
Regards,
Nuno
You are true , possible also 25320
I am sending virgin dump for Y17DT , here is picture and virgin dump
My idea, break eeprom use another 25320
very heard desolder of eeprom

BR
kasim

carsolution
13th November, 2009, 12:35 PM
What Kasim told you is true, very hard to desolder.
I told it can also be 25320 because all that appeared here used the 25320.
I usually desolder it but you must put the desolder gun in one side heating all the 4 pins at the same time and lift it, after one side is up you do the same in the other side.
Good luck.
Regards,
Nuno

juan andres
2nd December, 2009, 05:59 AM
hi
I'm from Argentina, I have a Corsa 1.7 dti with the same ecm, damage memory is 25,320, this file is ready to load into a new memory? thank all

rmilh
5th January, 2010, 11:58 AM
I'm just curious. What kind of data is stored within 25320 memory?

ppservis
6th January, 2010, 05:18 PM
OPEL im*o SOLUTION FOR HYBRID ECUS with K line and CAN

milanoffracing
6th January, 2010, 06:21 PM
OPEL im*o SOLUTION FOR HYBRID ECUS with K line and CAN


???????????????????:stupid:

gsi16v
25th January, 2010, 07:49 PM
pleace help need virgin dump astra y17dt

gsi16v
25th January, 2010, 07:54 PM
my dump is broken

gsi16v
25th January, 2010, 07:56 PM
must change eeprom

gsi16v
25th January, 2010, 07:59 PM
had a problem in my dump

gsi16v
25th January, 2010, 07:59 PM
this is dump

flyjohn25
7th February, 2010, 12:45 PM
hi i have dump for you but you need to edit the dump. after that you can make adaptation and you can make virgin with opcom. You need to chage in dump the security code in hex editor.

treo
27th February, 2010, 09:16 PM
You are true , possible also 25320
I am sending virgin dump for Y17DT , here is picture and virgin dump
My idea, break eeprom use another 25320
very heard desolder of eeprom

BR
kasim
Hi
I try your dump not work.

mihotd
29th March, 2010, 05:23 PM
Hi, can anybody post pinout of this ECU (K-line, CAN pins)
better way to make it virgin is always via diagnostic, but i have only the ECU, not the car, thanks

workas
29th March, 2010, 09:23 PM
Hi, can anybody post pinout of this ECU (K-line, CAN pins)
better way to make it virgin is always via diagnostic, but i have only the ECU, not the car, thanks


OPEL login reader from motor hybrid ECU. (http://codecard.lt/carprog/software/opel-login-reader-from-motor-hybrid-ecu-works-with-bosch-me1-5-5-siemens-simtec71-simtec71-1-delco-diesel-delco-multec-/prod_129.html)

jarfm
12th January, 2013, 05:44 PM
Hi very easy read and write eeprom . 25160
i will send virgin dupm for Y17DT

Hi m8,
Have U got this eeprom dump (25160) from Delco ECU Y17DT?
Searching in D.K. but only can find dump 25320
Thanx in advance