PDA

View Full Version : MEV17.4, PROBLEM AFTER IMMO_OFF



eculevel
12th April, 2018, 12:34 PM
the car is 207 1.4i,

mev17.4
0261204009
9665291180

with immo_off car start, but after 30 min dont start againg. when it does not start again, I find e2p rewritten. do I have to work, on e2p?, or do I have to do better immoff?

that someone can help me?

I post e2p/flasch ori and immo_off,

thanks in advance!

javiere
12th April, 2018, 01:03 PM
hi
I attached one of mine that worked well.
to see if it helps


regards

eculevel
12th April, 2018, 01:28 PM
try and rep

eculevel
12th April, 2018, 02:16 PM
not work, i cant write your flasch, chks not supported

eculevel
12th April, 2018, 05:49 PM
anyone can help me? when i rewrite e2p car start againg, after 10 min dont start...

icezero2010
12th April, 2018, 07:02 PM
the car is 207 1.4i,

mev17.4
0261204009
9665291180

with immo_off car start, but after 30 min dont start againg. when it does not start again, I find e2p rewritten. do I have to work, on e2p?, or do I have to do better immoff?

that someone can help me?

I post e2p/flasch ori and immo_off,

thanks in advance!

u have a checksum problem . do the mod and checksum(winols) on your file ori_All and write this with your tool without chk

eculevel
13th April, 2018, 08:30 AM
thanks for the advice my friend, but when I try to write only flasch with immo off and chks ok with winols, tells me cheksum not supported contact assistance, when I try with ori all, 3% stop write and says files dangerous sector 004c00 not aviable, what can I do?

mvekaz
13th April, 2018, 12:08 PM
What tool you use? Try with this file with Galletto ,boot mode.Write original e2p and this immo off file with chk ok.Disable chk correction on your flash tool.
Good luck.

eculevel
13th April, 2018, 03:06 PM
solved, thanks to all for help, i post immo off worked