View Full Version : Experiment with drilling EDC17CP45
sdtsedat
13th April, 2018, 12:13 AM
Hi people, todat tested first time drilling ecu bmw x5 4.0d with edc17cp45
All was good. Buyed drilling from magic. But one thing, the metal things comes inside the hole, i use air compressor.
Any other ideas?
Regardshttp://cloud.tapatalk.com/s/5acfe7a3bcaf5/VID-20180412-WA0007.mp4
Verstuurd vanaf mijn SM-G955F met Tapatalk
rh03
13th April, 2018, 03:31 AM
try to open ecu like quantum do it : https://www.youtube.com/watch?v=AqeZyBT9ZsY
Ignasvw
13th April, 2018, 06:03 AM
Hi people, todat tested first time drilling ecu bmw x5 4.0d with edc17cp45
All was good. Buyed drilling from magic. But one thing, the metal things comes inside the hole, i use air compressor.
Any other ideas?
Regardshttp://cloud.tapatalk.com/s/5acfe7a3bcaf5/VID-20180412-WA0007.mp4
Verstuurd vanaf mijn SM-G955F met Tapatalk
I remove pcb without heating whole ecu. You need flat metal plate, 1 minute and pcb removed
I used to use this onehttps://uploads.tapatalk-cdn.com/20180413/2ffc09ead50a538d466e58f1179a8d20.jpg
Sent from my iPhone using Tapatalk
carmageddon
13th April, 2018, 06:48 AM
I remove pcb without heating whole ecu. You need flat metal plate, 1 minute and pcb removed
I used to use this onehttps://uploads.tapatalk-cdn.com/20180413/2ffc09ead50a538d466e58f1179a8d20.jpg
Sent from my iPhone using Tapatalk
hi...can you send here more picture from your job with this plate?
sdtsedat
13th April, 2018, 06:52 AM
hi...can you send here more picture from your job with this plate?I like it also...
Verstuurd vanaf mijn SM-G955F met Tapatalk
honingkoning
13th April, 2018, 04:40 PM
I like it also...
Verstuurd vanaf mijn SM-G955F met Tapatalk
Buy Autotuner do it by diag in couple minutes [emoji12].
Wbr Adam.
voltechcar
13th April, 2018, 07:08 PM
when he have vr, but what if he not this file???
honingkoning
14th April, 2018, 10:56 AM
when he have vr, but what if he not this file???
AT have VR, if they Dont have you should open.
But for BMW for sure best option is AT.
Fast, reliable and always the right VR.
Wbr
sdtsedat
14th April, 2018, 06:02 PM
I tryrd this ecu with AT from my friend, vr read not available..
Monday i drill this ecu
Verstuurd vanaf mijn SM-G955F met Tapatalk
mislav88
14th April, 2018, 08:00 PM
I tryrd this ecu with AT from my friend, vr read not available..
Monday i drill this ecu
Verstuurd vanaf mijn SM-G955F met Tapatalk
update dde with esys, then you should have vr available
Myjector
16th April, 2018, 02:49 PM
I checked, AT has VR for EDC17CP45
maajkii
16th April, 2018, 03:40 PM
i check also, AT got VR.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.